Home Trusted by 500,000+ buyers

Expanded Metal Products - Expanded Metal Walkway Mesh

Supplier: Webforge playlist_addCompare

Expanded metal is one continuous single sheet of mesh produced when a flat metal plate is sheared and stretched but is left intact at the 'knuckles'. It is available in a variety of thicknesses with differing sizes and designs of the apertures.

Price Guide (Inc GST): POA

The strands and knuckles are set at a uniform angle to the plane of the sheet. This adds strength and rigidity and distributes the load to the supporting frames. Because there are no welds or joins it operates as a structural member that distributes loads evenly over a wide area.

The high strength to weight ratio makes it suitable for many industrial and ornamental applications. No loose strands or welds means minimal deterioration from constant exposure or movement.

A further feature is the provision of an excellent anti-slip surface. This makes the product suitable for ramps (e.g. inclined walkways adjacent to conveyors) platforms and stair treads.

The open nature of the product provides good visibility through the mesh as well as the easy passage of air and sound whilst ensuring security and protection.

Expanded Metal Walkway Mesh Features:

Material: Mild Steel

  • Recommended for impact, high load applications where economy and strength are paramount.CODES: M = Mild

Top Surface Safety

  • The raised angular pattern provides excellent grip on inclined walkways.CODES: R = Raised

Treatment / Colour Expanded Metal

  • Available Galvanised (ASNZ 4680), Bitumen Dipped or left Untreated.CODES: G = Galvanised, B = Bitumen Dipped, U = Untreated

Panel Size

  • Available in a range of sizes that allow for direct placement onto support steel without the need for cutting.CODES: 1 = 3000 x 1200 LWM, 2 = 3000 x 900 LWM, 3 = 3000 x 750 LWM, 4 = 3000 x 600 LWM,10 = 2300 x 1200 LWM, 11 = 2300 x 900 LWM, 12 = 2300 x 750 LWM, 13 = 2300 x 600 LWM

Download product brochure (0.72 MB)