Home Trusted by 500,000+ buyers

Farina CFO Series Guillotine Shear

Supplier: Press & Shear Machinery (Australia)

The CFO Series is the complete Shear. Available in NC or CNC configuration, the CFO Shear is robust in design and construction and will suit the most demanding of sheetmetal and plate working shops. Cutting capacities range from 5 mm up to 30 mm and cutting lengths from 2.1 mtr up to 6.1 mtr.

Price Guide: POA

Farina Hydraulic Guillotine Shear Model CFO

General Specifications:

Twin cylinder, overdriven hydraulic guillotine shear with guided beam, variable rake angle cutting action and high speed rear gauging system. NC (Numeric Control) of rear gauging system Wired 415 volts, 3 phase, 50 cycles supply, generally as described and illustrated in the attached brochure and to the following specifications.

• Heavy duty machine construction from high quality steel
• Infill table complete with ball transfers for easier plate handling
• Variable rake angle, 0.5° – 3.0?
• Rapid blade gap, manual adjustment
• Large throat in side frame for slitting of longer sheets / plates
• Individual hydraulic hold downs with the
hold down pressure proportional to the cutting force complete with non-marking pads
• Cutting length adjustment to increase cut stroke rate on short width sheets / plates
• Motorised back gauge with recirculating ball screw to 750 mm with programmable control and digital read out (via Nuova NC Controller)
• Stainless steel quality cutting blades
• 700 mm side squaring arm with scale and stop
• 2 off 700 mm front support arm
• Shadow line lighting
• Low noise pump and hydraulic unit
• Rear plate chute
• Foot pedal on wandering lead
• Electric and hydraulic overload protection
• Hydraulic oil
• Operating and service manual
• Colour: Blue and cream
• Built to C E Regulations

• Machine guarding:
Full length and full view front safety guard

Visit our website for downloads, catalogues, specifications and prices.