New from Madison Technologies is the Fibre Technology from Emtelle. With blown fibre systems like fibreflow, a low-cost tube route is installed, and fibre only added as and when it is needed, creating a fibre-lean solution. And when a new connection is required, there is no need to re-dig the street, just select an empty tube and blow fibre in.
Air-blown fibre is a method of installing fibre optic cables that relies on the flow of compressed air easing the fibre all the way to its destination.
Fibreflow air-blown systems are replacing traditional optics in access networks around the world.
The benefits include:
Reduced long term costs Much less splicing Less manpower Eliminates dead fibre Simpler network planning Easy quick upgrades in the future
The tube bundles come in various diameters and are normally configured in assemblies of 1,2,4,7,12,19 and 24. Other tube counts are possible. They are ideal for diverse inside and outside applications. Also included are fibre units and fibre cables optimized for air blown installation into the tube bundles: once the core infrastructure is in place – no need for expensive redundant fibre – future work can be executed simply and quickly. This allows our customers to upgrade or extend their network precisely in line with changing demands.
The fibre units provide fibre counts from 2 to 96 (single mode and multimode), meeting most last-mile requirements. Of course, blown fibre solutions are not limited to the last mile. For example, 96-way tube bundles can be used higher up in the network, an application for which Emtelle has developed a minicable solution – an example of how we develop new solutions to anticipate new challenges. A comprehensive range of accessories are also available including straight connectors, tube end caps, gas-block and water block connectors that provide an environmental seal between the fibre and the tube.
The fibreflow System in action
The tubular rout is in place. No more digging to do. The van arrives at the blow point wiht the equipment and the pan of fibrer to be installed. The blowing head is linked to the first tube, and the air supply is connected. Fibre is bed into the blowing head. Thirty minutes later the fibre emerges at the far end, and can be connected at once. The customer can be 'on-line' the same day. There is fibreflow bundle to match each application, whether outdoors buried, overhead, in-building or elsewhere.
How does fibreflow work
The working principles of fibrefloware simple and well developed. The blowing theory is based on airflow acting as a carrier in the tube. The air flows over the fibre at high speed and thus imparts no tension or stress on the fibre. The air supply is dried to the correct level and supplied down a plug-in hose. Fibre unit is deployed stress-free from a pan, permitting access to both ends of the fibre. The blowing head is very small and reliable, and easy to set up. It drives the fibre forward and measures speed, while also feeding in the air supply.
Tube routes are quickly created using push-in connectors for links and branches: This eliminates fibre splices wherever cables meet. A fibre can be blown through such a route typically in 20 or 30 minutes. At the far end, the air is back to normal pressure, very safe, and the fibre emerges stress-free, gel-free, ready for connection in minutes.
There are range extending methods which mean that 5km or 6km of fibre can be blown in a single unbroken length, minimising splices and optical losses. It is easy to plan a blow route, once it is decided what tube size and fibre count are to be used. Manholes or access points can easily be planned for the whole access network.
The modular system means that to add a customer to an existing route is much simpler and cheaper than with traditional optical networks, with typically no need to re-dig the main street.
Madison Technologies | Copper Cable, Fibre Cable, Professional Broadcast
Madison is a manufacturer and distributor of technology infrastructure and hardware across cabling, networking, wireless, audio visual, and test and measurement disciplines.
Australian owned and operated for over 20 years, Madison has been keeping Australian homes and business well connected. Which is appropriate, because our brand promise is Well Connected™. The principle behind our brand promise is that by working with Madison, either as a valued supplier or customer, you are well connected. It’s how we connect to our market, and it’s how we help you connect to your world.
With Madison, you are Well Connected™.