FieldConnex allows you to design your Fieldbus topology in an optimal way for your specific application:
- Full range of equipment to power & protect your FOUNDATION Fieldbus & PROFIBUS network
- State of the art Fieldbus power conditioners with Advanced Physical physical layer diagnostics
- Reliable segment protection
Whether your application requires hazardous or non-hazardous protection, FieldConnex Fieldbus solutions provide products to power, link & isolate your Fieldbus segments.
Segment protectors, power conditioners, repeaters, FieldBarriers & surge protection barriers give flexibility & superior operation to your Fieldbus installation.
The High Power Trunk is a new approach to solving hazardous area and general purpose area FOUNDATION Fieldbus and PROFIBUS applications. Energy limitation is done at the spur, not the fieldbus trunk cable. This allows the maximum number of devices and longer cable distances.
The C-... Type A Fieldbus cable can be used in IEC 61158-2/ISA-S50.02 based Fieldbus applications, and PROFIBUS applications. It features two 18 AWG conductors with a drain wire that can be used indoors & outdoors. Sold in bulk quantities.
The C-A... armored type A Fieldbus cable can be used in IEC 61158-2/ISA-S50.02 based Fieldbus applications, as well as PROFIBUS applications. It features two 18 AWG conductors with a drain wire that can be used indoors & outdoors. Sold in bulk quantities.
The C-V9-TEE-x tapping tee can be used in IEC 61158-2 based fieldbus applications to connect fieldbus instruments to a main fieldbus trunk. The C-V9-TEE-x features 7/8 inch trunk in & trunk out connections with a single spur connector. Suitable for fieldbus or PROFIBUS applications.