FireMaster Servery is a new fire barrier concept with 2 hours integrity, designed specifically for small to large openings in fire compartment walls,. The unit remains fully retracted and concealed operating only in the event of fire. Perfect for use in kitchen and canteen environments, it provides uninterrupted access between two work areas.
This revolutionary product with its off-the-shelf, lightweight, design is simplicity itself to install and requires no special steelwork structure,.providing the perfect alternative to heavy steel fire shutters.
'Gravity Failsafe' drive system allows curtains to safely descend under gravity at controlled speeds - only in the event of total power failure.
2 hour integrity and fire resistant performance
Tested for fire resistance from either or both directions.
The curtain fabric complies with all the requirements of BS 476 Part 22 1987. It meets the Class 0 requirements of England and Wales Building Regulations 1991, the requirement for Fire Propagation of BS476 Part 6 1989 and has Nil Spread of Flame, achieving Class 1 according to BS476 Part 7 1987.
The EFP 2/1000 is a composite material of stainless steel mesh and woven glass fibre, coated in a specially developed reflective aluminium enriched polymer. Tested in accordance with BS 476 Parts 6,7 and 22. Please note, curtains over 1.0m wide may contain visible seams.
A square section bottom rail is attached to the curtain to assist downward movement. To maintain a flush ceiling line when in the raised position, the fire curtain's bottom bar creates a slimline soffit.
The fire curtain fabric winds onto a tubular 70mm barrel of mild steel tube of sufficient diameter and wall thickness to resist deflection - mounted on endplate bearings.
Casings are manufactured from galvanised steel to suit a range of standard sizes. The barrel and curtain assembly is housed within the casing, and is a face fixed structure.
Side guides are required to provide a fire proof seal between the curtain fabric and the structure of the building. These guides are made from galvanised steel - 100mm deep x 33mm wide, which are fixed to the opening structure by non-visible bolts. Positive or negative pressure can be caused by a fire, which can result in the curtain bulging and pulling the fabric out of the side guides. To prevent this, tabs are attached to the outer edges of the fire curtain.
Guides, bottom rail and casings are supplied in a standard finish of galvanised steel, but are also available polyester powder coated in a range of standard RAL colours at additional cost.
In accordance with BS 476 Parts 6,7 & 22.
To Know More about Firemaster / Servery Fire Curtain Please click here
Coopers Fire | Fire & Smoke Curtains Specialists
Coopers Australia are specialists in the supply and installation of fire curtains and smoke curtains for the construction industry.
Both active and passive fire and smoke barriers, ventilators, ...