Australia's #1 industrial directory for equipment & suppliers

Fluke 77X mA Process Clamp Meters

Supplier: Fluke Australia

Milliamp process clamp meters measure mA signals without breaking the loop.

CONTACT THIS SUPPLIER TO FIND OUT MORE

Price Guide: POA

Fluke 771 mA Process Clamp Meter

The popular Fluke 771 mA Clamp Meter saves time by making fast, accurate measurements on 4-20 mA signal loops without breaking the circuit.

Features:

  • Best in class 0.2 % accuracy
  • 0.01 mA resolution and sensitivity
  • Measure 4 to 20 mA signals without ”breaking the loop”
  • Measure mA signals for PLC and control system analog I/O
  • Dual backlit display with both mA measurement and percent of 4 to 20 mA span
  • Measurement Spotlight illuminates hard to see wires in dark enclosures
  • Detachable clamp with extension cable for measurements in tight locations
  • Measure 10 to 50 mA signals in older control systems using the 99.9 mA range
  • Automatically change the 4 to 20 mA output for remote testing
  • Power saving features, auto-off, backlight timeout extend battery life
  • Hold function captures and displays changing measurements

See detailed specifications on the Fluke 771 mA Process Clamp Meter »

Fluke 772 and 773 mA Process Clamp Meters

 
The 772 and 773 expand upon the capabilities of the popular 771 mA Clamp Meter.
 
Features:
  • Measure 4 to 20 mA signals with in-circuit measurement
  • Simultaneous mA in-circuit measurement with 24V loop power for powering and testing transmitters
  • Source 4 to 20 mA signals for testing control system I/O or I/Ps
  • mA output linear ramp or 25% step output
  • Automatically change the 4 to 20 mA output for remote testing

See detailed specifications on the Fluke 772 mA Process Clamp Meter »

Additional features of the 773:

  • DC voltage measurement to verify 24V power supplies or voltage I/O signals
  • Source DC voltage to test input devices that accept a 1-5V or 0 to 10V signals
  • Scaled mA output provides a continuous mA signal that corresponds to the 4 to 20 mA signal measured by the mA clamp
    • Enables milliamp signal logging to a separate logging device without breaking the loop
    • Output mA signal enables a logging DMM or other device to record the 4- to 20 mA signal without breaking the loop
  • mA in/out: simultaneously measure the mA signal with the clamp and source a mA signal
    • Apply a mA input signal to a device and measure its’ 4-20 mA output on devices such as valves or mA isolators
  • Voltage output linear ramp or 25% step output
    • Automatically change the voltage output for remote testing

See detailed specifications on the Fluke 773 mA Process Clamp Meter »

See the full range of Fluke Loop Calibrators »

CONTACT THIS SUPPLIER TO FIND OUT MORE

Showcase your business!

Connect with 600,000 industrial buyers annually

Learn more