Use the Testo combustion analyzer for basic testing and tuning of all types of boilers, heaters or furnaces and also to set up and commission more complex multi-stage or modulating heating systems, for accurate combustion efficiency analysis.
Innovative features like the flue gas matrix will graphically display the combustion characteristics, which is an easy way to show if the heating system is running efficiently. Additionally the Testo 320 makes the job easier by displaying from 2 to 8 user-defined parameters simultaneously. The Testo 320 eliminates the guess work and provides accurate combustion system analysis.
Flue gas analysis on heating systems: the testo 320 basic flue gas analyzer is equipped with two sensors – an O2 and a CO sensor (without H2 compensation). In the case of CO measurement, the measuring range goes up to 4,000 ppm. You need a flue gas probe for the flue gas measurement (can be ordered separately). A temperature probe is integrated into the probe. All relevant flue gas measurement parameters can therefore be calculated: CO2 value, efficiency and flue gas loss. The flue gas analyzer is also suitable for flue draught measurements or pressure measurements
Changing probes is easy: The probes can be changed by the user. This means you can order other probes specifically required for your flue gas analysis (e.g. multi-hole probe, dual wall clearance probe, flexible flue gas probe)
Single-hose connection: in just one hand movement, all channels for the flue gas measurement can be securely connected via the probe coupling (gas paths, draught, temperature probe integrated in the flue gas probe, which can be ordered separately)
Long service life thanks to the long-life Li-ion rechargeable battery
Built-in magnets enable the flue gas analyzer to be attached to the burner/boiler quickly and easily
Integrated condensate trap: easy to empty
-20 to + 50°C
-50 to + 45 °C
Battery: 1500 mAh, mains unit 5V/1A
250 h (less with use Bluetooth & Backlit)
201 x 83 x 44 mm
HK Calibration Technologies | Calibration & Testing Services
HK Calibrations is a ISO 9001-2015 certified company for the provision of calibration services of electrical/electronic test & measurement equipment to the ISO17025 standard.
HK Calibrations was ...