MultiPro Confined Space Gas Detector
The Biosystems MultiPro confined space meter offers real time readings for up to 4 gases, true one-button operation (including calibration), and a built in event logger capable of storing information for 20 events including sensor type, max and average readings, time and duration. It's available with either a Li-Ion or an alkaline battery pack and offers run times up to 22 hours.
For remote use, both manual and motorized sample draw systems are available. The MultiPro is loaded with features that are critical for working safely in confined spaces.
MultiVision Confined Space Gas Detector
Multivision gas detector offers up to four independent sensors for the detection of only oxygen, combustible gas, carbon monoxide, and hydrogen sulfide.
The instrument case is made of chrome-plated ABS and is rated to IPX5 / IPX7 against water ingress (immersible) and is rated for RFI immunity to 40 V/m. The MultiVision may be equipped with a built-in motorized sample draw pump and datalogging.
The pump version features automatic switching between pump and diffusion modes. Available in Alkaline and NIMH rechargeable versions.
PhD Lite Confined Space Gas Detector
The PhD Lite is smaller, smarter, less expensive, and even easier to use. The PhD Lite monitors up to four atmospheric hazards simultaneously: oxygen, combustible gas, carbon monoxide, and hydrogen sulfide.
The PhD Lite allows you to choose specific sensors for the detection of CO or H2S when you have only one toxic hazard to deal with; or choose Biosystem's innovative new duel channel CO/H2S sensor to measure both carbon monoxide and hydrogen sulfide when both hazards are simultaneously present.
The PhD Lite is housed in a rugged, compact, metal-plated case designed to stand up to the most demanding environments. Each set of three disposable AA batteries provides up to 9 hours of continuous operation.
The Cannonball 3
One button gas detection with a memory
The Cannonball 3 portable gas detector is also designed to measure oxygen, combustible gas and up to two toxic gases.
It offers the ease of use and dependability of our other gas detection products with the additional advantage of being housed in a gasketed, waterproof case designed to take on the roughest industrial environments and survive.
The Biosystems PhD5
Confined Space Gas Detector
The PhD5 monitors up to five atmospheric hazards simultaneously: oxygen, combustible gases and up to three toxic gasses. Choose from a wide variety of toxic sensors; including Biosystems' innovative new "Duo-Tox" two-channel CO/H2S sensor to measure both carbon monoxide and hydrogen sulfide when both hazards are present without cross interference.
The instruments are equipped with the TouchIDTM automatic memory input system, which uses small memory buttons to store user identification, location information & language preferences. Download stored information easily with a touch of a button.
Buttons may be attached to worker ID badges, key rings or permanently mounted near frequently entered confined spaces.
The PhD Plus
The PhD Plus makes confined space gas detection easy and affordable.
This economical gas detector measures oxygen, combustibles, and up to two additional toxic gases. All normal procedures including fully automatic calibration adjustment are controlled through the single On/Off Mode button.
The easy-to-use PhD Plus is housed in a rugged, compact case with choice of snap-in NiCad or alkaline battery packs.
The PhD Ultra datalogging confined space gas detector measures oxygen, combustibles, and up to two toxic gases. All normal procedures including automatic calibration adjustment are controlled with a single button.
The instrument automatically logs gas readings, user and location ID and other important information. The easy-to-use PhD Ultra is housed in a rugged, compact case with choice of snap-in NiCad or alkaline battery packs.
IQ Docking System
The IQ Docking System is a computer controlled, automated multigas detector management system which manages data downloads from the individual monitors, calibration and battery maintenance of Biosystems gas detectors, minimizing the costs and time associated with manually calibrating and logging multiple multigas detectors.
The IQ Docking System consists of the IQ controller and up to ten instrument-docking modules, all driven by sophisticated easy-to-use- software and linked to as many as 12 different calibration gases.
The System is network compatible so several controllers can be used on the same network.
To Know More about Gas Detector Please click here