The Testo 350 is used to control emission measurements. It has a clearly structured graphic display and is especially easy to use. There are four different applications in the menu to choose from: burner, gas turbine, motors and user-defined applications. The instructions on the display guide you through the measurement and make the steps leading up to the start of the measurement easier. This saves both time and hassle. The Control Unit can also be used to remote control the Analysis Box when it is not positioned at the exhaust gas pipe or measurement site. This is especially advisable when carrying out work on larger systems.
The Analysis Box can be operated with up to 6 gas sensors, 5 of which are optional.
Select freely from sensors for | CO | NO | NO2 | SO2 | H2S | CxHy| CO2 |
Increased measurement range for unlimited measurements even when gas concentrations are higher
Easy-to-change gas sensors and easy access to wearing parts
Sealed housing with built-in impact protection for use in harsh conditions
Automatic processing of measuring programmes over a longer period
The Testo 350 contains the sensor system and the electronics that are needed to perform emission measurements. The Analysis Box comes standard equipped with an O2 gas sensor. You will, however, need to connect at least one more sensor (max. six) to operate the Box. Optional sensors include gas sensors for CO, CO2, NO, NO2, SO2, H2S and CxHy.
The increased measuring range allows you to carry out unlimited measurements even when gas concentrations are high. The increased measuring range (thinning) is automatically activated when gas concentrations are unexpectedly high. The measuring range of a selected sensor can be increased by a certain factor. An opening on the underside of the analyzer gives you access to all the relevant service and wearing parts, i.e. pumps and filters, which can easily be cleaned or replaced. The testo 350 also has numerous diagnosis functions with easy-to-understand readings and information. The exhaust gas analyzer constantly displays the current reading.
HK Calibration Technologies | Calibration & Testing Services
HK Calibrations is a ISO 9001-2015 certified company for the provision of calibration services of electrical/electronic test & measurement equipment to the ISO17025 standard.
HK Calibrations was ...