The Simtronics GDU Ultrasonic Gas Leak Detector listens to the ultrasound generated from escaping gas in all directions. A release does not need to cross an optical path nor does it need to physically reach the unit for detection.
The Simtronics GDU gas leak detector does not detect specific values of LEL or ppm; rather it listens for changes in background sound level.
Detection requires a driving pressure of at least 2 bar, hence detection of gas accumulations or vapours is not possible. In basic terms the detected sound is proportional to the leak rate (mass flow rate).
Background Noise Rejection Background noise is ignored by a threshold set in the control room and employing time delays. The Simtronics GDU gas leak detector is delivered factory calibrated and needs no field adjustment or re-calibration.
Performance Target Verification Unlike other gas detection methods the performance of the GDU gas leak detector can be demonstrated at commissioning to comply with the site safety case. This is achieved using a pressure regulated inert test gas to simulate the required performance target.
ProDetec | Fire & Gas Detection; Spark & Hot Ember Detection
ProDetec represents Simtronics Fire & Gas (previously known as Simrad Optronics), Firefly, IRMACO Group (StuvEx, ISMA & Pagg). Water Mist Engineering (WME), ETech, Fireater, Groveley Detection and ...