The Gross Weigher is a simple and effective tool for bagging 10 to 70kg’s of product. Mounted directly to a garner bin, the Gross Weigher needs only a power supply and clean dry compressed air. Depending upon the material flow characteristics of the buld material, the required throughput and accuracy, a feed device may also form part of the weighing and bagging solution. This device may have one or two speed filling capability.
Operation When the bag is placed on to the bag clamp, the operator hits two “whiskers” which activate the bag clamp. Two bag detection sensors detect a correctly placed bag and starts the filling cycle. Filling is started and the controller accurately monitors the bag filling. Material is fed directly into the bag to a preset weight via a single position or two position radial catch gate. The machine may be set to allow the bags to automatically drop from the bag clamp when the bag weight is reached or the bag can be left on the clamp.
An Active Weighing SolutionsGross Wiegher will typically deliver:
25kg bags up to 18 bags/min at ± 100 grams*
50kg bags up to 14 bags/min at ± 50 grams*
* 95% of all weighments will be within the stated tolerance.
EMC 2064 Weigh Batch Processor with
Automatic jog to weight
Automatic in-flight compensation
Analogue output (configurable)
Communications to computer or PLC using RS232 or RS422/485
Active Weighing Solutions is a dynamic weighing equipment specialist with more than 20 years experience in weighing equipment design, manufacture and maintenance. Whether its bulk material blending, ...