Norbar - Hand Torque Multiplier | Standard Series Get latest price

Hand Torque Multiplier | Standard Series

In Stock

Ratios quoted are always the torque multiplication ratio, not the velocity ratio as given for some other brands. For example, the velocity ratio may be 29.8:1 to give a torque multiplication of 25:1 ±4%.

• True torque multiplication guaranteed better than ±4%.
• Torque outputs up to 47,500Nm.
• High ratios allow the use of of a small torque wrench, multipliers can be used where access is limited.
• All models over 25:1 are available with an Anti Wind-Up Ratchet (AWUR).
• AWUR contains the 'wind up' developed in all high ratio multipliers allowing for easy and safe operation.
• AWUR locks the multiplier onto the bolt once torque is applied. Handtorques can then be used upside down and will support their own weight.

Standard Series

Model	Part Code	Range		Ratio	Input Square (inches)	Output Square (inches)	Major Ø (mm)	Overall Height (mm)	Weight (kg)*
		Nm	lb.ft
2	16012	1700	1250	5:1	3/4	1	108	126	5.24
2/25 Fitted with AWUR	16089	1700	1250	25:1	1/2	1	108	157	7.72
5	16014	3400	2500	5:1	3/4	1	119	140.5	7.16
5/25 Fitted with AWUR	16090	3400	2500	25:1	1/2	1	119	183.5	10.1
6	16016	3400	2500	5:1	3/4	1 1/2	119	146.3	7.2
6/25 Fitted with AWUR	16092	3400	2500	25:1	1/2	1 1/2	119	189.3	10.2
7	16067	6000	4500	5:1	3/4	1 1/2	144	175	14.5
7/25 Fitted with AWUR	16065	6000	4500	25:1	3/4	1 1/2	144	225.5	17.0
7/25 Fitted with AWUR	16068	6000	4500	125:1	1/2	1 1/2	144	239.5	18.5
9/25 Fitted with AWUR	16070	9500	7000	25:1	3/4	1 1/2	184	224.5	23.0
9/25 Fitted with AWUR	16071	9500	7000	125:1	1/2	1 1/2	184	234.5	24.5
11/25 Fitted with AWUR	16048	17000	12500	25:1	3/4	2 1/2	212	335	45.0
11/125 Fitted with AWUR	16049	17000	12500	125:1	1/2	2 1/2	212	307	46.5
13/125 Fitted with AWUR	16053	47500	35000	125:1	3/4	2 1/2	315	381	117

* Including reaction plate. 
Overall Height is the dimension from the top of the input square to the bottom of the output square.

Read more...

To contact Waltan Tools & Equipment about Norbar Hand Torque Multiplier | Standard Series use Get a quote.

Ratios quoted are always the torque multiplication ratio, not the velocity ratio as given for some other brands. For example, the velocity ratio may be 29.8:1 to give a torque multiplication of 25:1 ±4%.

• True torque multiplication guaranteed better than ±4%.
• Torque outputs up to 47,500Nm.
• High ratios allow the use of of a small torque wrench, multipliers can be used where access is limited.
• All models over 25:1 are available with an Anti Wind-Up Ratchet (AWUR).
• AWUR contains the 'wind up' developed in all high ratio multipliers allowing for easy and safe operation.
• AWUR locks the multiplier onto the bolt once torque is applied. Handtorques can then be used upside down and will support their own weight.

Standard Series

Model	Part Code	Range		Ratio	Input Square (inches)	Output Square (inches)	Major Ø (mm)	Overall Height (mm)	Weight (kg)*
		Nm	lb.ft
2	16012	1700	1250	5:1	3/4	1	108	126	5.24
2/25 Fitted with AWUR	16089	1700	1250	25:1	1/2	1	108	157	7.72
5	16014	3400	2500	5:1	3/4	1	119	140.5	7.16
5/25 Fitted with AWUR	16090	3400	2500	25:1	1/2	1	119	183.5	10.1
6	16016	3400	2500	5:1	3/4	1 1/2	119	146.3	7.2
6/25 Fitted with AWUR	16092	3400	2500	25:1	1/2	1 1/2	119	189.3	10.2
7	16067	6000	4500	5:1	3/4	1 1/2	144	175	14.5
7/25 Fitted with AWUR	16065	6000	4500	25:1	3/4	1 1/2	144	225.5	17.0
7/25 Fitted with AWUR	16068	6000	4500	125:1	1/2	1 1/2	144	239.5	18.5
9/25 Fitted with AWUR	16070	9500	7000	25:1	3/4	1 1/2	184	224.5	23.0
9/25 Fitted with AWUR	16071	9500	7000	125:1	1/2	1 1/2	184	234.5	24.5
11/25 Fitted with AWUR	16048	17000	12500	25:1	3/4	2 1/2	212	335	45.0
11/125 Fitted with AWUR	16049	17000	12500	125:1	1/2	2 1/2	212	307	46.5
13/125 Fitted with AWUR	16053	47500	35000	125:1	3/4	2 1/2	315	381	117

* Including reaction plate. 
Overall Height is the dimension from the top of the input square to the bottom of the output square.

Read less...

To contact Waltan Tools & Equipment about Norbar Hand Torque Multiplier | Standard Series use Get a quote.