The vibration sensor detects the vibration in the system (measured / evaluated physical unit = vibration velocity) This is converted into an analogue signal at the current output. The switching output behaviour is determined using the two setting rings.
Compact vibration switch
False trigger delay
Setting rings (manually adjustable after unlocking)
LED green: voltage supply
M8 process connection
LED yellow: lights when switching threshold and time delay are exceeded
Mount only in a thick housing wall (e.g. transport thread).
Ensure that the signal direction is correct
Ensure a safe vibration transmission and allow no elastic intermediate layers
Tighten the sensor with a tightening torque of 15 Nm
Maintenance, Repair & Disposal
The operation of the unit is maintenance-free.
It is not possible to repair the unit.
After use dispose of the unit in an environmentally friendly way in accordance with the applicable national regulations
GV Sensors | Vibration, Motion, Ultrasound and Oil Monitoring
GVS Reliability Products was formed in 2007. GVS provide high quality industrial reliability and condition monitoring solutions to the Australia, New Zealand and Pacific market.
With hands on industry ...