The HW16 has a lift car size of 1100mm x 1400mm with a maximum rise to 12 metres and has a maximum speed of .3 mps.
It has sliding lift car and landing doors with a standard finish of satin stainless.
There is also the option for both the lift car doors and the landing doors to have full glass panels framed with either an epoxy finished aluminium frame or alternatively, stainless frames as seen in the photos on this page.
These glass door panels are 10.38mm laminated and can be clear or grey tinted.
Harwel Model HW16 Complies with:
AS1736.16 for Lifts for persons with limited mobility Restricted Use/Automatically controlled
AS1735.12 Facilities for persons with disabilities
the Building Code of Australia sections E3.6 (a) and (b)
Fire rated landing doors AS1735.11
Economical to run
Economical to maintain
Safe to use
Safe and easy to maintain
Short lead times
When power is cut to the building the lift lowers to ground floor and doors open
This unit can be installed in your shaft or we can supply the enclosure/shaft in different configurations to fit your budget. Load bearing wall are not required because Harwel lifts are self supporting.
We will work with you or your architect to provide a lift to meet your specific requirements.
Harwel Lifts | Low-rise Lift and Hoist Equipment
Harwel Lifts and Hoists is a family owned company specialising in the low-rise lift and hoist manufacturing industry. Owned and operated by Harry & Jewel Smith who have a combined total of more than 70 ...