This economical model is a low-maintenance unit that comes with a range of finishes to enhance its surrounds.
It has manual or automatic hinged, swing landing doors, fitted with 10.38mm thick laminated glass (in grey tinted, white translucent or clear).
The HW16A is well-suited to fulfill the lift needs of community buildings, churches, workplaces, medical centres, retirement villages, nursing homes, etc.
Economical to run
Economical to maintain
Safe to use
Safe and easy to maintain
Short lead times
When power is cut to the building the lift lowers to ground floor and doors open
Harwel Model HW16A Complies with:
the Australian Standard Code AS1735.16 for Lifts for persons with limited mobility Restricted use / Automatically controlled
the Building Code of Australia sections E3.6 (a) & (b), and
the Work Health and Safety Regulations 2012.
We can install into a shaft supplied by the builder or Harwel can supply the shaft (enclosure). There are various shaft styles to select from to suit the budget. These units may be installed internally or externally with respect to the building. All Harwel lift models are self supporting and do not require load bearing walls.
Harwel project manages the entire process from initial design (working with your architect) to manufacture and installation in your premises. At Harwel we specialise in short lead times and minimum installation times. Lead times for this model are from 8-10 weeks to delivery.
Installation times vary on average from 3-6 days depending on number of levels and shaft requirements. As with all Harwel lifts and hoists, the HW16A is manufactured in our own workshop to our exacting quality standards. Our highly trained technicians will deliver and install the completed lift at your premises.
Harwel Lifts and Hoists is a family owned company specialising in the low-rise lift and hoist manufacturing industry. Owned and operated by Harry & Jewel Smith who have a combined total of more than 70 ...