Harwel | Passenger Elevators | Model - HWLR

Model HWLR Harwel Special Features:

• Shallow pit
• Reduced Overhead
• .5 mps speed
• 612kgs (9 passenger) load
• Car wall panelling includes satin stainless, laminates, mirrors, painted glass, glass panels & specialty metals.
• Ceiling finishes include white satin laminate with optional satin stainless/mirror stainless or laminates. The ceilings are fitted with energy efficient LED concealed strip lighting.
• Ventilation fans are concealed in ceiling and mechanical ventilation holes at the bottom of the car can be hidden behind the stainless skirting.

Benefits:

• This lift operates comfortably at 140 starts per hour and has a V.V.V.F. drive system for fast, smooth operation.
• An Australian made, energy efficient, safe lift with quiet, smooth operation, able to accommodate the finishes required… what else could you ask for in a passenger lift?
• You have the option of a structural aluminium Harwel shaft (enclosure) which is available in a range of options. We can provide the enclosure (or shaft) of structural aluminium, epoxy finished to colour of choice with grey tinted or clear glass inserts.
• Alternatively, we could supply and install a structural aluminium frame which is internally sheeted and fitted with a roof cap. The builder could externally clad for 120 min fire rating.

Note to Architects: Our design configurations are unlimited and we welcome your direct inquiry advising your specific requirements.

• Our lifts are prefabricated in our factory to minimise installation time. For example, a 2 floor, single entry lift installed in 4-5 days.
• Our lifts car openings can be adjacent (right or left handed) or through car openings.
• Harwel Lifts do not require ‘bond blocks’ to be built in by the builder or cut-outs for landing plates. Harwel door jambs accommodate our landing plates. We do require cut-outs for our doors and jambs to go into and other than that, we require power and a telephone line and clear access.