Wrist mounted device (HAVWEAR) monitors vibration levels in real-time
HAVWEAR tracks tool usage by syncing with RFID tags on the tools
Operator is alerted when personal EAV and ELV exposure values are exceeded
Charge daily in 15 minutes or 1hr twice a week
Online analytics reports allows easy tracking of exposure data and trends
Greater accuracy of vibration exposure monitoring
Better protection for workers and employees from Hand Arm Vibration Syndrome (HAVS)
National Hazard Exposure
Occupational exposure to hazardous levels of vibration is associated with a range of adverse health outcomes including vibration white finger (VWF), Hand Arm Vibration Syndrome (HAVS), carpal tunnel as well as musculoskeletal and neurological disorders.
In 2008 the National Hazard Exposure Workers Surveillance found that 43% of the 4500 workers surveyed in the Manufacturing, Construction, Transport and storage, Agriculture forestry and fishing and the Health and community services industries were exposed to Hand Arm Vibration. The largest cause of exposure was hand held power tools.
For further reading, you can download and view the report in full under the data sheet and brochure area on the left side of this page as well as visit the Safe Work Australia and Work Safe Victoria websites.
Any level of vibration exposure is unsafe, deploying controls as robustly as possible no matter the level of risk is essential.
The HAVWEAR is a personal, wrist mounted Hand Arm Vibration (HAV) monitoring device. HAVWEAR calculates and displays in real-time Hand Arm Vibration Syndrome (HAVS) risk points to inform the wearer of their exposure to vibration. Sound and vibration alerts also inform the wearer of incremental increases in HAVs risk exposure and action thresholds exceeded. There are two different data sets monitored by HAVWEAR; TEP and SEP.
Tool Exposure Points (TEP)
Exposure points are calculated using a tools pre-defined average vibration magnitude.
Sensed Exposure Points (SEP)
The HAVWEAR has the ability to determine the vibration magnitude sensed at the point to which the HAVWEAR is attached to the wrist. The HAVWEAR uses the HSE methodology to calculate SEP based on the length of time a tool is in use and the vibration level sensed by the HAVWEAR during use.
Whichever option you use, both TEP and SEP data are recorded by the HAVWEAR and stored in the Reactec online Analytics Platform to be reviewed and compared as required. This unique data helps determine the most appropriate risk assessment to drive controls and protect workers.
Tool usage can be tracked by simply pushing a button before placing the HAVWEAR next to a tool tag before use. A stick-on RFID tool tag is programmed with tool information and communicates with the HAVWEAR to determine tool information.
Without accurate knowledge of operator daily exposure, the likelihood of safely applying controls to keep hand arm vibration exposure below required levels is extremely low due to the unpredictability of most work processes across sectors from landscaping to engineering. It is widely accepted that manual assessments of exposure in the workplace, following regulations, will have a high level uncertainty. This can influence actions to reduce risk as well as assessing their effectiveness at a later date. Hence, digital monitoring is critical to reduce significant uncertainty on true exposure and help expedite the mitigation of HAVS risk.
HAVWEAR is part of the Reactec Analytics Platform which automates the whole process from calculating HSE exposure points in the field to viewing online reports. The reports include individual worker exposure and related tool use to pinpoint exposure hotspots. Also, over the longer term the Reactec Analytics Platform can be used to manage the exposure of the whole work force and therefore positively impact on health management.
JEA Technologies | Commercial & Industrial Hardware for industry
JEA Technologies Pty Ltd was established in 2003 as a specialist distributor of electronic peripherals covering Australia and New Zealand. We focus on industrial, professional and commercial applications. JEA has partnered with leading global manufacturers to bring their products to Australia and New Zealand, and we provide in depth technical, commercial and logistics support to our customers on these products.
Our people are product specialists who have many years’ experience working with the products, suppliers and customers. This experience has often made a significant contribution to the successful deployment of our customers projects and helped avoid costly reworks.
We work closely with our customers to fully understand their needs from both technical and commercial perspectives, and we then recommend optimum solutions to meet our customer’s needs. We back up this consultative process with in depth stock, logistics services, and in house repair services that can provide both warranty and non-warranty repairs and spare parts.
JEA specialises in touch screens, touch monitors, commercial and industrial LCDs, cash and cashless payment products, computer products, thermal printers for kiosks and technology based safety products.