Home Trusted by 500,000+ buyers
BACK Main Directory > Construction Equipment > Hazardous Area Cable Glands | C2K Increased Safety Ex E

Hazardous Area Cable Glands | C2K Increased Safety Ex E

Supplier: Gerard Lighting

Hazardous Area Cable Glands, CMP Type C2K Increased Safety (Type ‘e’) cable gland for use in Zone 1, Zone 2, Zone 21 and Zone 22 Hazardous Areas with all types of armoured cable providing an environmental seal on the cable outer sheath.

Price Guide: POA

Hazardous Area Cable Glands | C2K Increased Safety Ex e

The cable gland being suitable for use with armoured cables provides mechanical cable retention and electrical continuity via armour wire termination.

A reversible armour cone and Anyway universal clamping ring arrangement allows the cable to be easily disconnected from the equipment,for maintenance and change out etc.

This feature also facilitates remote make off procedures when the termination is to be conducted in confined spaces or in areas of restricted access.

The CMP C2K Cable Gland is suitable for use with Increased Safety Type e and Flameproof Type d enclosures that are equipped with a secondary

Increased Safety Type e terminal enclosure (i.e. Ex de) provided always that no source of ignition prevails and the prevailing code of practice for selection and installation is observed, e.g. IEC 60079-14

Technical Data

  • Type
    • C2K
  • Design Specification
    • BS 6121:Part 1:1989, EN 50262:1999
  • ATEX Certification
    • SIRA06ATEX1097X
  • Code of Protection Category
    • ATEX II 2 GD Ex e II, Ex tD A21 IP66, -Equipment Zone 1, Zone 2, Zone 21, & Zone 22 -Gas Groups IIA, IIB, IIC
  • Compliance Standards
    • EN 60079-0:2004, EN 60079-7:2003, EN 61241-0:2004, EN 61241-1:2004
  • IECEx Approval Number
    • IECEx SIR 06.0042X
  • Code of Protection Category
    • Ex e II, Ex tD A21 IP66
  • Compliance Standards
    • IEC 60079-0:2004, IEC 60079-7:2001, IEC 61241-0:2004, IEC 61241-1:2004
  • Lloyds Approval Number
    • 01/00171
  • DNV Approval Number
    • E-6157
  • ABS Approval Number
    • 01-LD 234401-PDA
  • Continuous Operating Temperature
    • -60°C to +130°C
  • Ingress Protection Rating
    • IP66, IP67, IP68
  • Deluge Protection Compliance
    • DTS01 : 91
  • Cable Gland Material
    • Electroless Nickel Plated Brass, Aluminium, Stainless Steel
  • Seal Material
    • CMP SOLO LSF Thermoplastic Elastomer
  • Cable Type
    • Single Wire Armour (SWA), Aluminium Wire Armour (AWA), Pliable Wire Armour (PWA), Steel Tape Armour (STA), Wire Braid Armour,Aluminium Strip Armour (ASA), Screened Flexible Wire Braid (e.g. CY / SY), Armoured & Jacketed
  • Armour Clamping
    • Reversible Armour Cone & Anyway Universal Clamping Ring
  • Sealing Technique
    • Unique CMP “LRS”  Outer Seal (Load Retention Seal)
  • Sealing Area(s)
    • Cable Outer Sheath
  • Optional Accessories
    • Locknut
    • Adaptor/Reducer
    • Earth Tag
    • Shroud
    • Entry Thread Seal
    • Serrated Washer