Australia's #1 industrial directory for equipment & suppliers

Hazardous Area Cable Glands | CWe Increased Safety Ex e

Supplier: Gerard Lighting

Hazardous Area Cable Glands,CMP Type CWe Increased Safety (Type ‘e’) cable gland for use in Zone 1, Zone 2, Zone 21 and Zone 22. Hazardous Areas with Single WireArmour (SWA) cable providing an environmental seal on the cable outer sheath.

CONTACT THIS SUPPLIER TO FIND OUT MORE

Hazardous Area Cable Glands | CWe Increased Safety Ex e

The cable gland being suitable for armoured cables, provides mechanical cable retention and electrical continuity via armour wire termination. A detachable armour cone and Anyway universal clamping ring arrangement allows the cable to be easily disconnected from the equipment, for maintenance and change out etc., and re-connected with the same consummate ease.

This feature also facilitates remote make off procedures when the termination is to be conducted in confined spaces or in areas of restricted access.

The CMP CWe Cable Gland is suitable for use with Increased Safety Type e and Flameproof Type d enclosures that are equipped with a secondary Increased Safety Type e terminal enclosure (i.e. Ex de) provided always that no source of ignition prevails and the prevailing code of practice for selection and installation is observed, e.g. IEC 60079-14.

Technical Data

  • Type
    • CWe
  • Design Specification
    • BS 6121:Part 1:1989, EN 50262:1999
  • ATEX Certification
    • SIRA06ATEX1097X
  • Code of Protection Category  IIA, IIB, IIC
    • ATEX II 2 GD Ex e II, Ex tD A21 IP66, Equipment Zone 1, Zone 2, Zone 21, & Zone 22 -Gas Groups
  • Compliance Standards
    •  EN 60079-0:2004, EN 60079-7:2003, EN 61241-0:2004, EN 61241-1:2004
  • IECEx Approval Number
    • IECEx SIR 06.0042X
  • Code of Protection Category
    • Ex e II, Ex tD A21 IP66
  • Compliance Standards
    • IEC 60079-0:2004, IEC 60079-7:2001, IEC 61241-0:2004, IEC 61241-1:2004
  • Continuous Operating Temperature
    • -60°C to +130°C
  • Ingress Protection Rating
    • IP66
  • Cable Gland Material
    • Electroless Nickel Plated Brass, Aluminium, Stainless Steel
  • Seal Material
    • CMP SOLO LSF Thermoplastic Elastomer
  • Cable Type
    • Single Wire Armour (SWA)
  • Armour Clamping
    • Detachable Armour Cone & Anyway Universal Clamping Ring
  • Sealing Technique
    • Unique CMP “LRS”  Outer Seal (Load Retention Seal)
  • Sealing Area(s)
    • Cable Outer Sheath
  • Optional Accessories
    • Locknut
    • Shroud
    • Entry Thread Seal
    • Serrated Washer
    • Earth Tag
    • Adaptor/Reducer

CONTACT THIS SUPPLIER TO FIND OUT MORE

Showcase your business!

Connect with 600,000 industrial buyers annually

Learn more