Australia's #1 industrial directory for equipment & suppliers

Hazardous Area Equipment - Ex e Rated Enclosures

Supplier: B&R Enclosures

Ex e enclosures are designed for increased safety in areas where flammable liquids, vapours, gases or combustible dusts are likely to occur in sufficient quantities to cause fire or an explosion.

CONTACT THIS SUPPLIER TO FIND OUT MORE

 The enclosures are designed to substantially reduce the likelihood of the occurrence of fault conditions which could cause ignition. They are suitable both zone 1 and zone 2 areas.

B&R's range of Ex e Enclosures include standard flat roofed enclosures as well as a sloping roof enclosure to minimise the build up of solids on the roof of the enclosure. This makes this equipment a great solution for mining or dusty applications (Ex t or DIP rated). Enclosures include: -

  

Sloping Roof Keyed Terminal Box (TBKS/CBKS)

Designed to house terminals, electrical equipment and cable terminations in Zone 1, Zone 2, Zone 21 and Zone 22. The sloping roof makes these units an advantage in dusty environments.

Sizes range from 300 x 200 x 150 (usable height x width x depth) to 1200 x 800 x 300.

 

Flat Roof Keyed Terminal Box (TBKF/CBKF)

Designed to house terminals, electrical equipment and cable terminations in Zone 1, Zone 2, Zone 21 and Zone 22. The hinged and keyed door makes these units ideal for general applications.

Sizes range from 300 x 200 x 150 (usable height x width x depth) to 1200 x 800 x 300.

 

Flat Roof Screwed Terminal Box (TBSF/CBSF)

Designed to house terminals, electrical equipment and cable terminations in Zone 1, Zone 2, Zone 21 and Zone 22. These units are designed for smaller applications such as pushbuttons, switches, contact blocks etc.

Sizes range from 150 x 150 x 80 (usable height x width x depth) to 600 x 200 x 120.

 

Pushbutton Control Station (CS)

Designed to suit a wide variety of pushbuttons in Zone 1, Zone 2, Zone 21 and Zone 22.

Sizes range from 112 x 90 x 90 (usable height x width x depth) to 343 x 90 x 90 and to suit from 1 to 6 pushbuttons.

 

Construction

  • Manufactured from 316 Stainless Steel with an N4 finish
  • Foamed in place polyurethane gasket
  • Flat face sealing technology for a better seal and less gasket wear

 

For further information about the IP66 Explosion Protected Enclosures for Hazardous Locations - Ex Range visit B&R Enclosures at http://www.brenclosures.com.au
OR
Use the IndustrySearch e-mail feature below and one of the B&R Enclosures team will respond to your enquiry directly.

Australia’s Largest Manufacturer Of Enclosures, Racks & Cabinets

CONTACT THIS SUPPLIER TO FIND OUT MORE

Showcase your business!

Connect with 600,000 industrial buyers annually

Learn more