Workshop Truck Hoist / Bus Hoist Mobile / German Eng. / USA Made

If you require a Bus Hoist, a Truck Hoist or a Rail Hoist contact Airdraulics who will assist with your requirement.

HETRA RGA "Wireless" Mobile Truck Lifting and Bus Lifting Hoists Features

• 7500 Kg Lift Capacity per column
• Virtually no set-up time
• Easy to use Via: On-post controls on all columns
• Infinite control for a set of columns or grouped or single columns
• Up to 8 columns in one set (60 Tonne Lift) 
• 10 Channels available so multiple stes within a workshop
• Highest Level of Safety Using the Wedge lock safety system
• Long life expectancy with ball nut assy.
• Low bottom frame 129mm and nett weight 545kg
• Exceptional lift height and superb carriage depth
• Charge weekly - Each column with built in 230 v battery charger

Further Technical Data

• Load capacity per column 7.5 t
• Full travel 1750 mm
• Raising /Lowering time 113 s
• Control voltage 48 V
• Cycles at full load (7500 kg) 20
• Cycles at part load (3500 kg) 35
• Motor power 1.5 kW
• Wheel size 8.25 to 12.00-20/12 R 22.5
• Charging time up to 8

These units offer the highest level of safety, quality and German engineering

The HETRA # RGA units are a simple Clean design with controls on each column that offer smooth precise control whether lifting or lowering (To lower press the down button no need to go up first) and with safety features including an Independent locking device acting directly between the column and carriage and the additional failsafe wedge!

These units are ideal for workshop facilities where column lifts may be required in numerous locations, these units are ideal due to there mobility and the fact that no power leads or mechanical linking is required. The wireless control between columns totally eliminates potential trip Hazards or worse Electrocution due to high voltage leads lying around.

Also available in the HETRA column lift range are the 415 Volt powered wired model # RGE at (7.5 Tonne / Column).

In addition to the HETRA column lifts we offer various accessories including support stands, reduction sleeves, remote controls and other products to make your job safer and easier whether you are lifting trucks, lifting buses or lifting rail engines and carriages.

We currently have excess stock so we are keen to move these units. Please contact us by phone or email to find out more about our special deal. Only while stocks last.