- Clear and simple user interface.
- 3 phase current output.
- 0-50A per phase output current.
- True RMS digital metering.
- Memory ammeter.
- Multi-function timing system.
- Auxiliary metering input.
- Large back-lit liquid crystal display.
- Thermal and over-current protection.
- Compact and portable.
- 220V or 400V 3f supply options.
- 115V-440V 3 wire supply with optional supply transformer.
T&R Test Equipment is a market leader in the field of current injection equipment. The range includes secondary injection units with 50A output capability up to 6000A primary injection systems. All have true RMS metering, a flexible timing system, and an easy to understand user interface.
The 50A-3PH is a three phase injection system providing commissioning and maintenance engineers with a flexible system for testing protective systems. It has an easy to understand panel layout and a simple user interface. The status of every function can be seen at a glance, and there are no complex menus to navigate.
The back-lit display on the 50A-3PH is bright and clear with a wide viewing angle. The results of a test can be seen here as they appear on the display.
An auxiliary metering input is provided and can measure voltage, current, frequency, and the phase between any of the current outputs and an external voltage or current.
The timing system is very flexible without compromising ease of use, allowing trip times, reset times and reclose times to be quickly measured to a high degree of accuracy.
The unit has a range of outputs allowing injection of currents as low as a few mA and as high as 50A. Voltages up to 18V are available on the main outputs. Three true RMS metering ranges are provided, allowing the full scale of the meter and trip level to be set independently of the selected output. Industry standard safety connectors are used on all inputs and outputs for convenience, reliability and safety.
The 50A-3PH is comprehensively protected by overcurrent, duty cycle and thermal trips, and keeps the user fully informed of any trip condition. The 50A-3ph can be used to test many types of single and three phase secondary protection including:
- Over and under current relays.
- IDMT relays.
- Time delay relays
- Earth fault relays.
- Miniature circuit breakers.
- Power relays.
- Tripping relays.
- Thermal relays