The AC HotStick will give early audible ("beeping") and visual (flashing LED) warning of the presence of dangerous voltages without the need to contact the surface carrying the current. The closer the user comes to the source of the voltage, the more rapidly the unit beeps and flashes.
The tool has found many applications, especially with first responders, fire, police and EMTs responding to vehicular accidents; with search and rescue operations in urban and rural settings; and with clean-up crews working on downed trees after wind and storms.
However, industrial users and anybody else who may unknowingly be exposed to the dangers of electrical shock and electrocution, will find the AC HotStick a necessity.
It is simple to use and is well constructed. It comes with a built in self test so there is never any doubt about it functioning properly.
It has also gained numerous functionality improvements through years of customer feedback. All of these things have made the AC HotStick an invaluable safety tool with a devoted following.
CONFIRM power shutdown, lockout, tag out, disconnects.
FIND hidden sources of dangerous AC from a safe distance without making physical contact.
DETECT power line back feeds from motor generators and energised pools of water.
ENSURE a safe environment for your vehicular rescue.
PROTECT the life of your first responders. Give him this safe and simple to use tool.
Urban Search and Rescue: Detection of unknown sources of unshielded and potentially hazardous AC voltages. Verification of proper power disconnect.
Fire: Identification of nearby high voltages and dangers from electrical wires during size-up, and after fires, during overhaul and investigations.
Vehicular Extrication: Quick check of site and vehicle for potential exposure to AC voltage. Verification and monitoring of power disconnect.
Confined Space Rescue: To verify power shut-off and proper lockout at the entry site and of the machinery and equipment posing hazard through accidental activation.
Hazmat: Avoid dangers of electrical shock or explosion caused by electrical shorts/arcs.
Disaster Operations: After earthquakes, wind and storms or floods, used to identify energised wires on roads or structural parts in collapsed buildings and flooded sites. Quick check of extent of power outage.
Power Restoration: Warning of energised wires hidden by fallen trees or caused by back-feeding from motor generators.
Industrial: During plant modification or industrial rescue to prove power disconnect, identify alternate sources or ungrounded machinery.
Trench Rescue: Locate potential sources of electrical shock during rescue operations.
Law Enforcement: Detect presence of AC voltage, avoid electrical hazards at accident scenes or during searches.
The AC HotStick consists of a high sensitivity AC amplifier for the frequency range below 100 Hz. The special logarithmic amplifier is capable of receiving AC signals over a very wide amplitude range. Such signals, emanating from an unshielded, voltage-carrying surface, can be made audible and visible as a signal.
The warning signal (beeps and LED flashes) become more rapid as the AC HotStick approaches the source, making source location quick. In the presence of high tension wires the sensitivity can be reduced by selecting the Low sensitivity or the Front focused mode.
The sensitive section of the AC HotStick is located in the red striped area. When used in the High or the Low sensitivity mode the unit will respond to signals from all sides (omni-directional sensitivity).
When the Front Focused mode is selected the unit responds only to signals received from the front of the AC HotStick. This reduces the sensitivity and concentrates detection into a small frontal area, permitting pinpointing of the source and distinguishing between adjacent wires.
The unit features a complete self-test circuit: Immediately after turning the unit on, a built-in, low frequency oscillator will operate for about 3 seconds simulating power line signals. Rapid beeping for about 3 seconds indicates proper operation of the unit.
A low voltage watchdog circuit monitors the battery power. If battery power is too low, the unit will make a constant warning beep, alerting the user to replace the batteries. The unit requires virtually no warm-up and is operational about 10 seconds after being turned on.
In normal use with intermittent operation, a set of standard AA alkaline batteries will typically provide one year of service. If left on continuously the batteries will run down in about 300 hours. In order to assure operation and prevent battery leakage, the batteries should be changed annually.
After unscrewing the lanyard the batteries are accessible. Batteries should only be changed in a clean, dry atmosphere.
The electronic circuitry is mounted on a printed circuit board, housed in a sturdy, fully insulated plastic pipe. The set is splash-water proof. It has been designed for operation in potentially explosive atmospheres. Hermetically sealed switches and quality components provide reliable operation and long life even in severe environments.
Pac Fire Australia | Personal Safety & Protection Equipment
Pac Fire was established with the founding vision of suppling the highest quality PPE/C to Australian firefighters and emergency service workers.
This core motivation has led Pac Fire Australia to represent the standard for excellence in the PPE/C industry. Pac Fire's success is closely tied to two fundamental principles:
1. Sourcing the highest quality products that balance superior protection and operational performance with comfort
2. Offering paramount customer and after sales service
Over the years, the Pac Fire range has grown to include over 500 individual products sourced from iconic brands such as Bristol Uniforms, Pacific Helmets, YDS, Skellerup, Kappler, Kestrel, BlowHard, OWS, Pok, Icebreaker, Underwater Kinetics, Adaro and more. With new and influential brands coming on-board, like our most recent partnership with Responder Wipes.