Australia's #1 industrial directory for equipment & suppliers

Hoisting Equipment

Supplier: King Materials Handling

King Materials Handling has an extensive range of hoisting equipment.

CONTACT THIS SUPPLIER TO FIND OUT MORE

Electric Chain Hoist
Wide variety in single and 3 phase. Capacities from 100kg to 7.5 tonne. Single and dual speeds available.

Wire Rope Hoist
Available in single and three phase. Capacities from 150 Kg to 5000 Kg.  Also available as a builder's hoist with swing arms to suit applications.

Air Hoist
Exceptional in harsh environments, such as heat, dust, humidity and for high duty cycles. Perfect for explosive/hazardous areas. Range 1/2 tonne to 25 tonne.

Beam Trolley
Suited to I-beams. Push, hand wheel or motorized available. Capacities from 250kg to 10 tonne.

Plate and Girder Clamps
Plate clamps for vertical and horizontal use on plate and sheet. Girder clamps are fully width-adjustable from 75mm to 570mm, and with capacities from 1 tonne to 10 tonne.

Chains and Slings
Available in single or multiple leg slings to any length.

Webbing Slings
Lightweight, flexible, tough and will not damage product! Available with eyes each end or endless loop style. Every width, length and capacity possible. New flexi lift system enables a sling to be made up instantly to any length -- in seconds.

Pallet Hook
Lightweight, flexible, tough and will not damage product! Available with eyes each end or endless loop style. Every width, length and capacity possible. New flexi lift system enables a sling to be made up instantly to any length -- in seconds.

Spreader Bar
Available in any capacity to 20 tonnes. Can be fixed or adjustable width pickup points.

Lifting Cage
Suited to cargo, pallets, bottles, people, etc. All designed to appropriate codes to suit applications.

Coil Hook
8 tonne and 16 tonne standard capacities. Auto balancing to provide load stability. Can have a nylon hook cover for coil protection.

Drum Hoist/Rotator
2 models. 500kg and 1000 kg capacities. Chain wheel and worm drive gearbox enables tilt, and holds securely in any position. Twin duplex chain girth strap with over centre lock and safety pin for utmost security.

Drum Clamps
I.P. Lifting Clamps are specially fabricated to raise steel drums using an auto rim latching system. The vertical drum clamp version ensures the drum remains vertical at all times during hoisting.

Lifting Magnets
Suitable for flat or round ferrous metals. Capacities from 300 Kg to 9000 Kg (flat), and 600 Kg to 4300 Kg (round). Choice of manual on/off or automatic.

Rare earth magnets have extremely high capacity to magnet weight ratio and are used in conjunction with a hoist to lift and place heavy materials.

Bulk Bag Lifters
A range of bulk bag handlers suited to both forklift and crane hoist.
Maximum capacity 2000 kg.

Hoist Jib. Wall Mounted
This jib clamps to a 50mm diameter pole. The pole can be either standard scaffold, or a length of pole can be attached to two brackets which can be screwed to a wall or an existing vertical column.

The hoist for this jib is usually mounted in a fixed position near the end of the jib at 600mm from the pivot point.

Hoist Jib. Floor Mounted
This particular jib is mounted to a column which is bolted to the floor through a base plate, and secured to the wall at the top of the column for extra bracing.

The wire rope hoist runs on a trolley with nylon wheels.

There are many variations on this theme, with many different heights, capacities and slewing arcs.

For more information on the Hoisting Equipment visit King Materials Handling at www.kinggroup.com.au
OR
Use the IndustrySearch e-mail feature below and one of the King Materials Handling team will respond to your enquiry.

CONTACT THIS SUPPLIER TO FIND OUT MORE

Showcase your business!

Connect with 600,000 industrial buyers annually

Learn more