Hollow Wall anchor
Flush finish, low profile head;
Anti rotation barbs on head flange;
Collapsing legs with integral nut, provides high strength and allows the screw removal with out the anchor within the cavity;
Can be set with a setting tool for speed of assembly or power screwdriver;
Material: Body = Pressed sheet metal, Screw = Carbon Steel;
Coating = Zinc electroplated passivated chromate conversion coating.
How to use
- Drill the correct size hole through the material then tap the hollow wall anchor into the hole until flush with surface;
- Turn the screw with a suitable screwdriver to expand the anchor;
- Remove the screw and place through the hole in in the fixture and back into the hollow wall anchor and re tighten the screw.