Home Trusted by 500,000+ buyers

Hydraulic Components - GARTHANE® - 9220 GARTHANE® U-Seals

Supplier: Garlock playlist_addCompare

Benefits of Hydraulic Components - GARTHANE® - 9220 GARTHANE® U-Seals:

Price Guide (Inc GST): POA

  • Increased seal life and performances
  • Less equipment downtime
  • Fewer sizes save inventory expense
  • Eliminates chance of costly premature equipment failure

Features of Hydraulic Components - GARTHANE® - 9220 GARTHANE® U-Seals:

  • 90 Durometer Urethane - High tensile strength - High tear resistance
  • Reverse bevel lip design - Less friction - Responds immediately to pressure
  • Balanced Design - Can function as a rod or piston seal
  • Clear Urethane - No hidden defects in seal
  • Extensive tooling list - Greater size availability-both inch and metric

Advantages of Hydraulic Components - GARTHANE® - 9220 GARTHANE® U-Seals:

Strength/Durability

  • Four times the tensile strength/tear resistance of conventional seals
  • High modulus counteracts extrusion and shear forces
  • Withstands shocks over a wide range of temperatures and pressures
  • Exceptional abrasion resistance
  • Outstanding endurance under difficult operating conditions

Flexibility

  • Excellent elasticity
  • Excellent resilience
  • Withstands high degree of deformation

Temperature and Chemical Resistance

  • Excellent for use against petroleum based fluids to 225°F (107°C); air, warm water and water glycol to 180°F (82°C)
  • Withstands dilute acetic and alkaline solutions, aliphatic alcohols and hydrocarbons, salts and solutions of aromatics and solids in concentrations under 80%
  • Not recommended for use with very strong oxidizers, highly concentrated acids or bases, pure aromatic compounds, esters, ketones, automotive brake fluid or steam

Pressure Resistance

Compounded to withstand a wide range of pressure conditions- Normally used as hydraulic cylinder or large ram press seals to 3,500 psi (242 bar)- Successfully used for slow-moving equipment to 8,000 psi (552 bar), and static applications to 30,000 psi (2,070 bar) on specially adapted equipment

Recommended Tolerances and Finishes for Hydraulic Components - GARTHANE® - 9220 GARTHANE® U-Seals:

  • Shaft hardness: 30 Rockwell C (minimum)
  • Groove length (axial): Height of U-seal plus 10% of cross section (0.032 minimum)
  • Dynamic surface finish: 10 to 20 RMS Tolerance: ±0.003 (maximum)
  • Static surface finish: 60 RMS (maximum) Tolerance: ±0.005 (maximum)

For More Information on Hydraulic Components - GARTHANE® - 9220 GARTHANE® U-Seals >>

Showcase your business!

Connect with 500,000 industrial buyers annually

Learn more