Hyjet Float Switch HFS Series

The positive micro switching eliminates the possibility of more than one circuit being in operation at any one time. The design innovation of the switch is the ‘sliding detent’ action which obviates wave induced oscillation (common in mercury-type switches) while maintaining consistency in switching level accuracy. The smooth, robust ABS switch housing on the HFS model prevents adhesion of foreign materials.

Specifications

• Liquid Temperature: Min 0oC (32oF)
• Liquid Density: Max 60oC (140oF)
• Protection: Min .65g/cm2
• Working Pressure: Max 1.5g/cm2
• Switching Speed: IP68 @ 20m (65ft)
• Contact Life: .35MPa
• Contact Type: 600/min
• Switching Angle: 10 million switches
• Max Voltage: Microswitch with NO and NC contacts
• Max Current: 20o (from horizontal)
• Cable Material: 240Vac
• Cable Size: 10 Amp
• Housing Material: Neoprene Rubber H07RN-F
• Chemical Resistance: ø 10mm/3 x 1.0mm2
• ABS – Acrylonine Butadiene Styrene
• Acid – Good
• Alkaline – Good
• Petrol – Good

SETUP:

• Secure cable at appropriate height to ensure desired switch levels are achieved.
• The differential between switching On/Off or Off/On can be adjusted by moving the cable weight relative to the Float Switch. The further the weight is situated from the Float Switch the greater the ‘switching differential’. Set up to suit the particular application.

PRODUCT RANGE:

• HFS-1310 Hyjet Float Switch NRB 10m Cable
• HFS-1320 Hyjet Float Switch NRB 20m Cable