Hylec Controls - Cube Measuring Station - Hylec Concrete

Hylec Concrete Cube Measuring Station

The Measuring Station has many features including:

• 3 through-beam edge detecting optical measuring systems
• A separate display unit with 3 digital displays in mm error readings, width and depth, and one for height. There is a 4th digital display showing the mass, as this Station is fitted with a load cell
• An RS232 signal is provided for transmission of ASCII data in mm to a PC via MODBUS system.
• Robust, to suit the concrete laboratory environment

Why choose Hylec Controls' Cube Measuring Station?

• The edge measuring system includes a laser transmitter and CCD receiver, is totally digital and measurements are independent of temperature, surface texture, colour of sample or dirt on lenses.
• Edge Measurement minimises errors due to craters in the sample surface
• The station is supplied with a spacer jig for the 100mm samples. When not in use - the spacer is locked to the top of the station so as not to affect the weight readings of the 150mm cube samples
• Fitted with weigh feature – eliminates need for a platform scale, and allows all 3 dimensions and weight to be transmitted via one data stream.
• Dimensions transmitted in mm as an error value. Self-contained system – measurements can be made manually if PC not available
• Manual dimension calibration facility to compensate for wear of mechanical parts
• Reference cubes are provided, and button is used to calibrate the station.
• Mechanical over travel stops for overload protection
• Auto-tare feature for weight – zeroed reading when a sample is removed
• Cal-Enable lock on display panel – this allows calibration in the field
• The sample is mounted upside down on a hardened centre button and rests at an angle against several hardened side supports, to ensure correct positioning of the sample and ergonomic working location for the operator.
• Height is thus measured at the bottom of the meniscus of the "rough end", while the width and height are measured at right angles to one another at the mid-height of the sample.

Read more...

To contact Hylec Controls about Hylec Controls Cube Measuring Station - Hylec Concrete use Get A Quote.

The Measuring Station has many features including:

• 3 through-beam edge detecting optical measuring systems
• A separate display unit with 3 digital displays in mm error readings, width and depth, and one for height. There is a 4th digital display showing the mass, as this Station is fitted with a load cell
• An RS232 signal is provided for transmission of ASCII data in mm to a PC via MODBUS system.
• Robust, to suit the concrete laboratory environment

Why choose Hylec Controls' Cube Measuring Station?

• The edge measuring system includes a laser transmitter and CCD receiver, is totally digital and measurements are independent of temperature, surface texture, colour of sample or dirt on lenses.
• Edge Measurement minimises errors due to craters in the sample surface
• The station is supplied with a spacer jig for the 100mm samples. When not in use - the spacer is locked to the top of the station so as not to affect the weight readings of the 150mm cube samples
• Fitted with weigh feature – eliminates need for a platform scale, and allows all 3 dimensions and weight to be transmitted via one data stream.
• Dimensions transmitted in mm as an error value. Self-contained system – measurements can be made manually if PC not available
• Manual dimension calibration facility to compensate for wear of mechanical parts
• Reference cubes are provided, and button is used to calibrate the station.
• Mechanical over travel stops for overload protection
• Auto-tare feature for weight – zeroed reading when a sample is removed
• Cal-Enable lock on display panel – this allows calibration in the field
• The sample is mounted upside down on a hardened centre button and rests at an angle against several hardened side supports, to ensure correct positioning of the sample and ergonomic working location for the operator.
• Height is thus measured at the bottom of the meniscus of the "rough end", while the width and height are measured at right angles to one another at the mid-height of the sample.

Read less...

To contact Hylec Controls about Hylec Controls Cube Measuring Station - Hylec Concrete use Get A Quote.