Australia's #1 industrial directory for equipment & suppliers

ICP DAS PROFIBUS to 4-ch HART Gateway : GW-7557

Supplier: ICP DAS Co., Ltd

GW-7557 is a PROFIBUS Gateway to support PROFIBUS DP and HART protocols.

CONTACT THIS SUPPLIER TO FIND OUT MORE

It allows the PROFIBUS Master to access the HART Slave devices. These HART Slave devices can be a transmitter, an actuator, a current output device.

Introduction

The GW-7557 is a PROFIBUS Gateway to support PROFIBUS DP and HART protocols. It allows the PROFIBUS Master to access the HART Slave devices.

These HART Slave devices can be a transmitter, an actuator, a current output device, and so forth. By using this module, users can put their HART slave devices into PROFIBUS network easily.

Moreover, the GW-7557 can be applied in various harsh environments by its high isolation protection design. And it fits for the application of remote data acquisition, control, process automation, and factory automation, etc.

Features

  • RoHS Design
  • 16-bit Microprocessor inside with 80 MHz
  • Profichip VPC3+C PROFIBUS controller
  • Support PROFIBUS DP-V0 slave
  • Detect PROFIBUS transmission rate automatically
  • Max transmission speed up to 12 Mbps for PROFIBUS and 115.2 kbps for COM Port
  • Allow two HART masters
  • Work in point-to-point or multi-drop HART mode
  • Support 4 HART channels
  • Connect up to 15 HART slave devices per HART channel
  • Support HART Short/Long frame
  • Support HART burst mode
  • 2500 Vrms High Speed iCoupler Isolation Protection for PROFIBUS network
  • 3000 VDC Isolation Protection on the PROFIBUS side
  • Provide LED indicators-PWD, ERR and RUN LEDs
  • Built-in Watchdog
  • Mountable on Rail DIN
  • Provide English/Chinese manuals

Utility

  • Read/Write module configuration of the GW-7557
  • Provide auto-scan function for HART communication parameters
  • Provide test function for HART slave devices.
  • Show PROFIBUS user parameters of the GW-7557
  • RoHS Design
  • 16-bit Microprocessor inside with 80 MHz
  • Profichip VPC3+C PROFIBUS controller
  • Support PROFIBUS DP-V0 slave
  • Detect PROFIBUS transmission rate automatically
  • Max transmission speed up to 12 Mbps for PROFIBUS and 115.2 kbps for COM Port
  • Allow two HART masters
  • Work in point-to-point or multi-drop HART mode
  • Support 4 HART channels
  • Connect up to 15 HART slave devices per HART channel
  • Support HART Short/Long frame
  • Support HART burst mode
  • 2500 Vrms High Speed iCoupler Isolation Protection for PROFIBUS network
  • 3000 VDC Isolation Protection on the PROFIBUS side
  • Provide LED indicators-PWD, ERR and RUN LEDs
  • Built-in Watchdog
  • Mountable on Rail DIN
  • Provide English/Chinese manuals
  • RoHS Design
  • 16-bit Microprocessor inside with 80 MHz
  • Profichip VPC3+C PROFIBUS controller
  • Support PROFIBUS DP-V0 slave
  • Detect PROFIBUS transmission rate automatically
  • Max transmission speed up to 12 Mbps for PROFIBUS and 115.2 kbps for COM Port
  • Allow two HART masters
  • Work in point-to-point or multi-drop HART mode
  • Support 4 HART channels
  • Connect up to 15 HART slave devices per HART channel
  • Support HART Short/Long frame
  • Support HART burst mode
  • 2500 Vrms High Speed iCoupler Isolation Protection for PROFIBUS network
  • 3000 VDC Isolation Protection on the PROFIBUS side
  • Provide LED indicators-PWD, ERR and RUN LEDs
  • Built-in Watchdog
  • Mountable on Rail DIN
  • Provide English/Chinese manuals

Utility

  • Read/Write module configuration of the GW-7557
  • Provide auto-scan function for HART communication parameters
  • Provide test function for HART slave devices.
  • Show PROFIBUS user parameters of the GW-7557

CONTACT THIS SUPPLIER TO FIND OUT MORE

Showcase your business!

Connect with 600,000 industrial buyers annually

Learn more