Never be caught out again with Pro-Ma Systems Puncture Sealant - seals punctures in the tread area as they happen.
Exclusive to Pro-Ma Performance Products, Puncture Sealant’s patented chemical structure can fill and seal holes in the tread area. Pro-Ma Puncture Sealant has proved completely effective for more than 18 years in sealing punctures in the tread area of tubeless tyres. Combining special fibres, adhesion agents and corrosion inhibitors in a water soluble, glycol base, Puncture Sealant is engineered to withstand the toughest conditions, offering not only easy application but continual fluidity within the tyre. No mixing, stirring or other preparation is necessary.
* Can be used in tube or tubeless tyres
* Can lower running temperature of tyres
* Can extend tread life and provide safer motoring
How it works
The Pro-Ma Puncture Sealant is installed quickly and easily through the valve stem. Average installation time is just minutes per tyre. When the vehicle is driven, the rotation of the wheel and the centrifugal force causes the entire surface inside the tread area to be coated with Puncture Sealant. The adhesion properties of Pro-Ma Puncture Sealant keeps the solution in place at all times and allows it to be ready to seal the source of the air loss in the tread area.
Pro-Ma Puncture Sealant is available in two grades:
Domestic: For use in cars, motorbikes, bicycles, trailers, caravans and golf buggies.
Commercial: For use in tyres of light commercial vehicles, 4WD vehicles, trucks, tractors, buses, fork lifts and ride on mowers.
2 x 500mL Box; 1 litre
CLICK HERE http://www.tinyurl.com.au/bnn
Blog CLICK HERE http://carcareman.blogspot.com
Independent Distributor Pro-Ma Systems Pty Ltd
10 Mawson Street Woodridge
Logan City Queensland Australia 4114
Ph 07 3208 1560
Mob 0407 210 013