The IGMC-111GP is a cost-effective solution for a conversion interface between 10/100/1000Base-T(X) and a 100/1000Base-X SFP socket. It allows the user to extend communication distance by super fast optical fibre.
Support 1 port 10/100/1000Base-T(X) auto-negotiation and auto-MDI/MDI-X copper port
Support 1 port 100/1000Base-X SFP fibre port
Support Jumbo Frame up to 9K Bytes
Support LFP (Link Fault Pass-through) function
Relay output to carry capacity of 1A at 24 VDC for warning system
Provided DIP-Switch to setting function
Rigid IP-30 housing design
DIN-Rail and wall mounting enabled
The IGMC-111GP is a cost-effective solution for a conversion interface between 10/100/1000Base-T(X) and a 100/1000Base-X SFP socket. It allows the user to extend communication distance by super fast optical fibre. The IGMC-111GP supports MDI/MDIX auto detection, therefore crossover wires are not needed.
As well as this LFP (Link Fault Pass-through) is also supported. When one side of the link fails, the other side continues transmitting packets, and waiting for a response that never arrives from the disconnected side. Use the DIP-Switch to enable the LFP function, then IGMC-111GP will force the link to shut down as soon as noticed that the other link has failed, giving the application software a chance to react to the situation.
The IGMC-111GP has huge operating temperature range, from -40 ~ 75°C it can handle almost any operating environment. Furthermore it also accepts a wide voltage range from dual 12~48 VDC power inputs.
JEA Technologies | Commercial & Industrial Hardware for industry
JEA Technologies Pty Ltd was established in 2003 as a specialist distributor of electronic peripherals covering Australia and New Zealand. We focus on industrial, professional and commercial applications. ...