Standard on all models are two Ethernet ports, eliminating the need for an external switch in applications where a remote LAN is made up of only one or two devices. The switch is fully managed and can support VLAN & QoS functionality.
Connection to Serial hardware such as RTU’s and PLC’s remains a key application for many customers. Modems can come with up to 3 Serial ports each with a range of configuration options. One port may be used as a drop-in replacement for dial-up modem emulation in either IP or circuit switched data modes.
With a small, robust and rugged enclosure the NextG modems can be installed stand-alone or secured with the DIN Rail mount option. Power supply for the devices are isolated and operate from a wide input range from 10VDC to 60 VDC.
- Telstra NextG / Optus 3G / Vodafone 3G
- Quad band GSM/GPRS
- Tri-band UMTS/HSDPA 850/1900/2100Mhz
- Serial over TCP/IP
- Circuit Switched data with dial up modem emulation
- Static and Dynamic TCP/IP routing
- Policy based routing
- Network and port Address translation (NAT/NAPT)
- Quality of Service (QoS)
- DNP3 Support
On Board I/O
- 2 Digital Inputs
- 2 Digital Outputs
- DNS proxy
- Dynamic DNS
- DHCP Server on LAN ports
Management & Configuration
- Web interface
- Remote config backup and restore
- Remote firmware upgrade
- 0° to 70° C
- Operating Humidity 10% to 90%
- CE Type
- Telstra NextG / Optus / Vodaphone
For more details on the complete Cybertec range of cellular data communications please contact Paqworks to discuss your application.
For further information about the Industrial NextG Modem & Router visit Paqworks - IP Cameras at http://www.paqworks.com
Use the IndustrySearch e-mail feature below and one of the Paqworks - IP Cameras team will respond to your enquiry directly.
Solutions For Industrial Data Communications & Networking