Units consist of a head with jets rotating in two perpendicular planes, and a sealed drive motor operating through reduction gears.
During the first cycle, the jets cover the whole inside surface at the rate of one impact point for every 2-3 degrees of angle (depending on the model). In each successive cucle the impact points are staggered by 0.4-0.8 degree.
- Reactor storeage vessel and tanker cleaning
- Pipeline cleaning
- Water and solvent rinsing, etc.
- Pressures up to 1000 bar
- Flows up to 25 m3/hr
- Hot water and solvent models available
- Hose reels and telescopic supports