Equipped with FLIR’s exclusive Lepton micro thermal camera, the FLIR TG167 shows you where potential problems are brewing and where to aim your spot.
The FLIR TG167 Spot Thermal Camera bridge the gap between single spot infrared thermometers and FLIR’s thermal cameras. Equipped with FLIR’s exclusive Lepton® micro thermal sensor, the TG167 let you see the heat so you know where to reliably measure it.
The TG167 is primarily designed for indoor electrical inspections; if you are an electrician looking for hotspots in electrical cabinets or switch boxes, the TG167 will produce higher quality images because the camera is optimized for targets in a narrow field of view (25° horizontal).
G167 Features and Functions
See the heat and speed up troubleshooting
Know where to measure temperature
Grab and go simplicity—no special training required
Pocket portable to fit a crowded tool bag
Rugged and reliable
IR resolution 80 × 60 pixels
Thermal sensitivity/NETD < 150 mK
Field of view (FOV) 25° × 19.6°
Minimum focus distance 0.1 m (4 in.)
Image frequency 9 Hz
Focus Focus free
Detector type Focal plane array (FPA), uncooled microbolometer
Spectral range 8 – 14 µm
Display 2.0 in. TFT LCD
Object temperature range –25 to +380 °C (–13 to +716 °F)
Color palettes: hot iron, rainbow, grayscale
Emissivity correction: 4 pre-set levels with custom adjustment of 0.1 – 0.99
Memory type Micro SD card 75 000 pictures with included 8 GB Micro SD card
Laser Dual diverging lasers indicate the temperature measurement area, activated by pulling the trigger
Battery type Rechargeable Li ion battery, 3,7 V
80 x 60 pixels
< 150 mK
-25°C to +380°C
8 – 14 μm
25° x 19.6°
+1.5% or 1.5°C
Special Promotion on this product is available.
Mention IndustrySearch and get 10% off
For more information or a quote please call or use the email for a direct reply.
OBIAT Electronics Pty Ltd | Test & Measurement Equipment
OBIAT Electronics has been established as an importer, distributor, wholesaler and retailer of quality Test and Measuring Instruments for over fifteen years.
Our competent staff collectively have over forty years of experience in electrical and electronic testing and are well qualified to offer the right advice and applications support for our customers equipment needs.
We provide service and calibration support and have a competent network of sub-distributors throughout Australia. If you have a requirement for Test and Measuring Instruments don't waste your time and money. Talk to us first and last!