The InstalTest 3017 is programmed with the Pass/Fail limits, test parameters and tables found in AS/NZS3017 Electrical Installations - Testing & Inspection Guidelines. The testing and certifying of completed work to AS/NZS3000 is mandatory, but often not carried out because traditional methods are so time consuming.
Consider a large installation with hundreds of socket outlets that should be tested prior to being energised. With the Instaltest, simply choose the auto-sequence test called “Socket Outlet” and you can test, certify and store test results on each socket outlet at a rate of seconds per socket compared to manual, single test methods.
The InstalTest 3017 gives contractors a more practical way of testing and certifying completed work to AS/NZS3000. This guarantees higher productivity and profitability for the contracting business, better compliance to standards and regulations, and improved overall electrical safety.
The InstalTest 3017 conducts all of the tests and inspections required under AS/NZS3000: Voltage, Visual Inspections, Earth Continuity & Resistance, Insulation Resistance, Polarity, Correct Circuit Connections, Fault Loop Impedance and RCD Verification tests.
Users can choose tests with fixed parameters and limits, or user defined parameters and limits. Where AS/NZS3017 requires specific test parameters and limits, the InstalTest is pre-programmed with the compliant test settings. For example the "Earth Continuity & Resistance: Main Earthing" test is set to a 200mA with 0.5ohm Pass/Fail limit. Pass is indicated by?and Fail is indicated by ?.
In addition, the InstalTest can be used as a multimeter, insulation tester, loop impedance tester and RCD tester for troubleshooting and general electrical work.
Fast Compliance Testing with Auto-Sequence Testing
Traditional multifunction testers conduct single measurement functions only. The InstalTest introduces the concept of "Auto-Sequence Testing". An auto-sequence is several single tests grouped together to carry out particular task. Examples of auto-sequence tests include "Metallic Switchboard Enclosure", "Aerial Conductor", "Lighting Point" or "Socket Outlet". Each auto-sequence has pre-defined Pass/Fail limits and the tests are conducted in the sequence specified by AS/NZS3000 and AS/NZS3017.
For example to test a "Socket Outlet", choose "Socket Outlet" from the auto-sequence menu, plug the mains measuring cable into the socket under test and the InstalTest automatically sequences through earth resistance, polarity and correct connections tests.
Sequence testing is particularly effective for carrying out testing and certifying of completed work, for example testing and certifying hundreds of socket outlets and lighting points on a large new installation using traditional methods is extremely time consuming. The InstalTest provides the fastest and most practical way of meeting the mandatory test requirements of AS/NZS3000, OHS and electrical safety regulations.
Easy to Use Graphical Display
Traditional installation and multi-function testers are operated via a rotary switch. The InstalTest features a full graphical display with pull down menus for measurement parameters, help screens with connection diagrams and user prompts for test connections or inspections. The screen also displays "Warning -Live Conductors" messages when carrying out supply available tests, a particular benefit that improves operator safety. Another advantage of a graphics display is that functions can easily be edited or added if standards or regulations change.
Print Installation Compliance Reports
Where record keeping and reporting is required, such as in OHS and electrical safety regulations, the InstalTest will store results, download to PC software and print Safety & Compliance Test Reports with user name, license number, switchboard, sub-boards and articles locations and test results. This provides users with a complete installation compliance management system, allowing contractors provide a professional report of test results to the installation owner/occupier and maintain PC based records for required statutory period.
Emona Instruments | Industrial and Educational Technologies
Emona Instruments range covers electronic and electrical test and measuring instruments for the Australian market, engineering teaching equipment for Australia and New Zealand, and worldwide exports of the TIMS Telecommunications Training System.
Our electronic test and measurement product range covers:
* PC Based Instruments
* Data Acquisition & Logging
* Logic Analysers
* Multimeters - Benchtop & Handheld
* Function Generators & Counters
* RF Test Equipment
* Laboratory Power Supplies
* Production Safety Test & PCB Faults Locators
* Device Programmers & Erasers
* Circuit Simulation, Design & Layout
* Digital & Analog Panel Meters
* Calibration Equipment
Our electrical compliance and safety testing range covers:
* Portable Appliance Testing (Testing & Tagging)
* Installation & Installation Compliance Testing
* Cable Tracing & Faults Testing
* Mains Energy & Power Instruments
Our biomedical testing equipment covers:
* AS/NZS3551 Biomedical appliance tester
* NIBP simulator
* SP02 simulator
* Electrosurgical tester
Our engineering teaching range covers:
* Electronics, electrical and power engineering
* Control engineering (control & dynamics)
* Hydrogen fuel cells for training & OEM applications
* Telecommunications training
* Fluid mechanics, hydraulics & hydrology
* Thermodynamics, heat transfer, internal combustion engines
* Unit operations, biochemical engineering, process control
* Food Technology
Our coverage is Australia and New Zealand with offices located in Sydney, Melbourne, Brisbane, Adelaide, Perth and Auckland, and our team of Applications Sales Engineers are ready to provide technical advice or on-site demonstrations on our wide range of products.