All common types of conductors can be interconnected, including bare aluminium or copper mains.
The connectors have been tested to relevant standards and are approved for use by Australian power distribution utilities.
Mains: Bare copper or aluminium
Tap: Insulated copper or aluminium
Provides a fully sealed, waterproof connection on the tap.
No need to strip cable to make the connection
Simultaneous piercing on main & tap
Torque controlling shear heads on all bolts
Tightening bolts do not come into contact with live components
Captive end cap for protection of tap cable, which can be mounted on either side.
Stainless steel fasteners
When using 2 bolt connectors from this range, each bolt must be tightened a 1/4 to 1/2 turn alternately, until the shear head operates.
For tightening the shear head bolts, use only a 13mm AF, six sided hexagon socket (17mm AF for models NTD431XFA and NTD451XFA).
For double insulated cables, the outer sheath should be removed before applying the connector.
Sicame Australia | Electrical Distribution Products
Sicame Australia Pty Ltd is a leading manufacturer and supplier of Low Voltage Aerial Bundled Cable (LVABC), Insulation Piercing Connectors and associated equipment in Australia.
In response to the growing trend toward the adoption of Overhead Aluminium XLPE Service Cable by numerous supply authorities, Sicame Australia has developed a complete range of products specifically designed for the purpose. This system allows a safe, economic and speedy installation of a customer to overhead mains with pro-vision for cable connection, support and fusing at both the house end and pole end.
These products have been tested to the relevant Australian Standards for connectors and hardware as well as European and American Standards. IPC products have been tested in compliance with AS4396 (Int.) 1996 for IPCs.
Sicame design, manufacture and distribute a unique range of waterproof single and multi-tap overhead and underground Insulation Piercing Connectors for use in electricity distribution systems in Australia and the South Pacific.
These products are enhanced by a complete range of Aerial Bundled Cable and general construction fittings and accessories manufactured both internally and throughout the Group Sicame worldwide network.