- Chemical, petrochemical industry
- Oil, natural gas
- Machine building
- Input 0/4 ... 20 mA, supplying and non-supplying
- Suitable for SIL 2 per IEC 61508/IEC 61511
- Bidirectional HART® signal transmission
The model IS barrier intrinsically safe repeater power supply has been designed for applications in combination with intrinsically safe 4 ... 20 mA sensors. By using different connection terminals, 2-wire as well as 4-wire transmitters can be connected.
The analogue measured value is transmitted to the non-hazardous area, galvanically isolated from the hazardous area. On the output side, the repeater power supply can be operated as supplying or non-supplying.
The test sockets contained in the COMBICON connectors enable the direct connection of HART® communicators.
The repeater power supply has been tested for operation with the following WIKA products: LH-20, IL-10, IS-3, IS-20, IS-21, IPT-1x, DPT-1x, UPT-2x, T24, T32
In intrinsically safe circuits, the repeater power supply enables the safe operation of these products. A template to create the proof of intrinsic safety can be found on our website.