Reticulate ANY IR Code
The IR Reticulation Box will reticulate virtually any infra-red code so it can be used with any infra-red remote or control panel to form the most simple of control systems
The IR Reticulator Box will blast IR code from its front panel so you can flood a whole room or cupboard with IR. IR emitters can be conveniently plugged into the control ports at the rear. The IR Repeater will control up to 40 devices.
This package comes complete with:
- 1 x IR Receiver
- 4 x IR Emitters
- 1 x IR Driver Box (Complete with internal power supply)
- Leaving you with nothing else to purchase.
Plug and Play
The IR Reticulation Box is a plug and play device that needs no programming and is installed in seconds.
Most cost effective on Market
Command Systems were pioneers of Infra Red and have in fact been dealing with IR for over 25 years. All of our IR Products have 100% reliability, but at the same time are some of the most cost effective solutions on the market.
Specifications: ZTF0001 IR Repeater
- Outputs data received from IRBus , modulated at 38KHz.
- One optical output for direct control of IR devices.
- Four wired outputs drive optical couplers for remote devices.(Can be expanded)
Power supply: 220 - 250 volts AC. Outputs 12volts DC (nominal) at 500mA for IRBus .
Enclosure: Black ABS
Dimensions: 40mm(H) x 130mm(W) x 130mm(D)
- Power cable
- IR Receiver
- 110v operation
- ZTO0001 Optical couplers
- ZTF0002 Port Expander