Krone trailed disc mower, with roller type conditioner and with new centre of gravity mounting for an even surface pressure over the entire working width. 2.7 mtr working width
Advanced cutter bar:
The new mower cutterbar is a fully enclosed and welded construction. The wedge shaped profile enables the highest quality of cut - even when the forage is flattened and the mower is working in less than optimum conditions
Large Drive Gears:
The main forces are transmitted by a series of large spur gears. Auxiliary gears, positioned at the very front of the bed then satellite off this main gear train to drive the mowing discs. This optimum overlap of the cutting blades results in an absolutely perfect cut
Replaceable stops have been placed on the front of the cutterbar to improve the cutting result and protect the cutterbar from damage
The flexible yet positive drive of the mowing unit via swivel gearbox offers advantages in turning, without any danger of damage to the PTO which remains in the same position. The agility of the mower fitted with the lateral drawbar is incredible, it means mowing with no interruption, no lifting and reversing even in tight turns and corners
Centre of Gravity:
The mower is not only suspended from the centre of the frame but is also mounted at the centre of gravity. The advantage is always an even surface pressure over the entire working width and no lateral forces, lower fuel consumption and hence higher economy and output
using the central springs, the optimum surface pressure is set across the entire working width. This allows the mower to be adjusted to the individual ground conditions.
Roller Type Conditioner:
Fitted with full width profiled, intermeshing chevron styled rollers this conditioner is particularly suited to legumes and other leaf crops. The polyurethane plastic is resistant to wear, dramatically increasing service life. The lower roller is always driven and the upper roller can be driven as an additional option
Kubota Corporation was established in Japan in 1890.
From a cast iron pipe manufacturer in Osaka, Kubota Corporation has grown into a highly successful multi national company employing over 15,000 ...