Features of Low Temperature Incubator (Programmable, Peltier Cooling) (IJ101)
Highly functional fixed temp. incubator with varying capacity.
A compact model ideal for preserving samples and for constant temperature testing
A CFC-free, low-vibration model with a cooler equipped with peltier elements
Uses a programmable temperature controller (IJ201/300)
Has a convenient pre-reset temperature function ( as an option)
Air jacket can be attached as an option
Two units can be stacked by the stacking support (Option)
The IJ101W observation window uses environmentally friendly glass made from combination of energy-saving pair glsass and half-tempered glass, which prevents wasteful heat loss
A sliding mounting table can be provided with the IJ300 model ( as an option) for convenience when setting a microshaker inside and when adding / removing samples. The service outlet on the side of the unit does not require any wiring. A shaker cannot be set in the IJ101W model.
Safety has been enhanced with the addition of a self-diagnostic function, an overheat prevention device and an over-current circuit breaker.
Operating Temperature Range
5~60?(at room temp.25?)
Temp. Control Accuracy
Temp. Distribution Accuracy
Time to Max. Temp.
Time to Lowest Temp.
Mica heater 120W
Peltiert element, Forced radiation type
Temp. Control Method
Program operation (30 steps x 1, 15 steps x 2, 10 steps x 3), Fixed operation, Quick auto-stop, Auto-stop, Auto-start operation
Calibration off-set, Key-lock function, Auto recovery function at power failure
Self-diagnostic function(Temp. sensor error, heater failure, SSR short-circuit, Auto overheat), Overheat prevention(IJ201/301), Liquid pressure overheat preventor, Over-current ELB, Main relay error
Shelf Loading Capacity
Approx. 5kg/ shelf
Shelf(Stainless punching metal) 2pcs., Shelf support 4 pcs., Receiver for drain 1pc.
Internal dimensions(W×D×H mm)
External dimensions(W×D×H mm)
AC115V/AC220V single phase with step-down transformer
Maintenance and Warranty
Conditions: temperature and humidity: 23 deg.C+/-5 deg.C, 65%RH+/-20% (no load) External dimensions do not include protrusions.
Banksia Scientific Company | Scientific Equipment
An established supplier of high quality scientific paraphernalia, Banksia Scientific Company supplies a wide range of scientific devices and products to clients all over Australia, New Zealand and the ...