Bore Caps are available with different size discharge threads. Your pipe and adaptor size is what will determine what size discharge thread it will need to connect with. Please keep this in mind when selecting your bore cap.
A pump shroud is needed to cool the motor and is only required if you are installing a 4 inch pump down 6 inch or larger casing. A shroud adapter is also available on this site.
1 Phase Cable 3-wire/4 core submersible drop cable is required. However, you must check with your electrician on cable size. He will do volt drop calculations to meet site requirements to comply with AS.
Stainless Steel Support Cable
Available in 3mm cable or 4mm cable.
Stainless Steel Support Cable Grip/Clams
Available in 3mm or 4mm to suit S/S Cable.
Liquid Filled 63mm – Available in 0-800kPa, 0-1000kPa, 0-1600kPa & 0-2500kPa pressure ratings.
Flexible Riser Pipe
Series 100 is for depths up to 100.The sizes are 32mm and 50mm internal diameter.
Series 200 is for depths up to 250m. The sizes range from 40mm to 200mm internal diameter.
As well as the couplings, ties and joiners.
The installation roller is a device that fits on the top of the bore casing. The rollers make it easy to lift and lower the bore pump down the borehole.
We are an Australian business that ship pumps daily Australia Wide from various locations around Australia with no charge to the customer.
2007 - Started selling OEM Bore Pumps and the business name ...