The DB14 DESKLINE Built-in actuator sets the standards for inline actuators. The DB14 is specially designed for integration in a customised 3-part column, to achieve the optimum freedom of design for various desk applications.
The compact design was developed to fulfil the market requirements for a low built-in dimension and at the same time a long stroke length. Furthermore, the compact design enables a very slim guidance design.
The DB14 system is controlled by the DESKLINE® control box CBD6S which ensures optimal parallel drive and a pleasantly low noise level.
The DB14 can be used as a single column or in 2, 3 or 4 parallel systems. The parallel drive was constructed to compensate for an uneven load on the desk by means of the control box.
The control box is designed with a soft start/stop function to ensure smooth drive.
Compact design where actuator function is an integrated unit
Cable mounted on the DB14 for connection to CBD6S with a separate DESKLINE® motor cable.
Max. load: 700 N per leg
Max. speed: 38 mm/s unloaded
Standard installation dimension: 508 mm
Standard stroke length: 660 mm
Dimension of motor: ø 48 mm
Low noise level
2 x Hall sensor enabling parallel drive with CBD6S
Synchronous drive of the middle profile
Single or 2, 3, 4 parallel drive or even multi-parallel with up to 16 columns.
Duty cycle: 10% ~ 6 minutes per hour or 2 minutes of continuous use at full load.
Ambient temperature: 10 to 40 °C
Compatible with DESKLINE® control boxes and controls
Will be approved according to EN 60335-1
Will be approved according to UL962
Storage and transport temperature: -10 to +50 °C.
LINAK | Electric Linear Actuator Systems
LINAK electric linear actuator systems - Lifting columns and height adjustment
Electric Linear Actuation from LINAK Australia
• LINAK Australia is a subsidiary of LINAK, an international company ...