Most common case sizes are 63mm, 100mm and 150mm dial sizes. However - 80mm, 200mm and 250mm are also available upon request.
Mounting configuration can be Direct Mount Bottom Entry (DB), Direct Mount Rear Entry (DR), Surface Mount Bottom Entry (SB), Panel Mount Rear Entry (PR) and Flush Mount Rear Entry (FR).
Accuracy - 63mm and 80mm +/- 1.6% of full scale, 100mm, 150mm, 200mm and 250mm +/- 1.0% of full scale.
Pressure ranges from -100 to +100,000 kPa (standard scales). Can also be supplied in PSI, KG/CM2, Bar, mPa, inHG, inH20, mmHG, cmHg or any units scale desired.
Glycerine is the case fill for normal temperature applications and Silicone Oil is the case fill for higher temperature applications.
Can be fitted with diaphragm seal if the process medium has solids that could clog the gauge or if to be used in the food or beverage industries.
Floyd Instruments | Pressure and Temperature Gauges
Since 1935, Floyd has locally manufactured and supplied a wide range of pressure gauges and industrial thermometers. We are the largest Australian distributor of high quality Stiko pressure and temperature gauges manufactured in the Netherlands and also distributors for Crystal Engineering Digital Test Pressure Gauges, Reotemp Bimetallic Thermometers and Klay Instruments Pressure and Level Transmitters.
Floyd specialises in manufacturing gauges to customer requirements, from specific dial markings to special threads. Pressure gauges are manufactured with various mounting configurations with dial diameters from 50mm to 300mm. Thermometers dial diameters can be from 25mm to 200mm. Other special manufactured items include analog Test gauges, Safety pattern, Oxygen, Refrigeration, Duplex and low pressure capsule gauges. A wide variety of Diaphragm seals can also be fitted to gauges for use on corrosive applications or where mediums contain solids.
Floyd are committed to manufacture/supply quality products and we offer a standard of service and technical support that our market demands.