Short length internally threaded expansion anchor.
No special setting tools required.
Able to be used with neat machine head bolts.
General purpose medium duty fixings to concrete, brickwork and block work, in conjunction with bolts or threaded studs.
Can be used on vertical surfaces e.g Brick Walls.
Use when ficture or machine is likley to be moved later.
How to use
- Drill hole at recommended diameter and at least the depth of the anchor. Clean hole thoroughly with a brush;
- Remove debris by way of a vacuum, hand pump or compressed air etc;
- Insert the Loxin net end first until it is flush with the surface;
- Insert the correct size bolt through the fixture into Loxin and tighten.