Compatible with variety of inks
The Dotmark uses a printhead with a compact high speed
valve designed to run a variety of inks.
- Pigmented Inks
- Dye-based inks
- Methyl Ethel Keytone based ink (MEK)
- Alcohol based ink
- Water based ink
- Custom inks (such as non-toxic)
Simple and easy bracketry for installation
Ink is supplied to the printhead via the ink reservoir, pressurised using the integrated air-pump (or optionally through plant air).
The supplied mounting bracket and hardware provides a flexible solution to installation in any application.
As the machines are so lightweight - making your own custom mounting brackets to suit your own application is extremely simple.
User serviceable, reliable and low maintenance
The self-contained controller will operate at 110VAC and 220VAC and offers easy adjustment of dot-size, burst-rate and burst time.
The Dotmark is user-serviceable and operates with low maintenance for a cost-effective, simple and reliable ID marking alternative.
Maintenance usually involves purging the unit before a shift to flush the dried ink from the front of the nozzle, which is also an ongoing process during periods of inactivity.
- Prints at up to 600 dots per second
- On non-porous or porous surfaces
- On moving or stationary objects
- Simple and easy to use
- Selection of different ink colors
- User serviceable
- Print Head
- Power Supply
- Ink Supply System, 1Liter
- Air pump
- Optical Sensor Trigger
- Mounting Equipment