Increase horsepower and fuel economy, reduce emissions and reduce engine and gear wear.
MBL8 Concentrated Oil Additive is an outstanding oil supplement for petrol and diesel engines, which has been designed to increase horsepower and fuel economy, restore compression, reduce emissions, oil consumption, engine and gear wear. MBL8 Concentrated Oil Additive consists of micro-metallic particles suspended in a base oil, together with other ingredients which provide superior lubrication, reducing friction, heat and wear. For use in petrol and diesel engines, manual transmissions, differentials (not limited slip differentials), transfer cases, power steering, some air compressors and hydraulic systems.
Allow 5000km or 100hours of operation to a new or reconditioned engine before adding MBL8 Concentrate Oil Additive, to permit initial break-in.
Add immediately in all other applications.
MBL8 must be shaken vigorously before using. For best results, MBL8 should be added during an oil and filter change. After draining oil and replacing filter, add the specified amount of oil less 1 litre (more for larger applications).
Mix MBL8 thoroughly with the last litre of oil. Add to the engine and operate immediately for at least 15 to 30 minutes before shutdown. With components, i.e., manual gearboxes, differentials, etc., always ensure that MBL8 is thoroughly mixed with oil before adding to the component being treated. Always mix MBL8 with oil before treating any component.
Recommended Dosages in Petrol or Diesel Engines
Passenger cars and light commercial vehicles: (a) With 4 cylinders, add 75mL per application. (b) With 6 cylinders, add 100mL per application. (c) With 8 cylinders, add 125mL per application.
Heavy trucks, industrial, marine and commercial applications: With 6 or 8 cylinders, add 250mL per application.
Large industrial and marine application: 20mL per litre of engine oil.
Do Not Overdose. NB: In engines with 80,000 km or more of use, it may be necessary to change the oil and filter soon after the first application, due to the detergent effect of MBL8. MBL8 is not to be used in new or newly reconditioned engines until running in (approx 5000 klms) has been completed.
Future Oil Changes: Continue the recommended oil change schedule after the first application of MBL8 adding the proper dosage listed above with each oil change.
In manual transmissions, differentials and gearboxes add 20 mL of MBL8 per litre of oil (Not for use in automatic transmissions or Limited Slip Differentials).
In large hydraulic systems, e.g., farm machinery and industrial systems add 1 part MBL8 to 250 parts oil, or 4 mL per litre.
Do NOT use in torque converter systems or with clutches or brakes that operate in oil.
For small engines such as 4 stroke mowers and industrial engines add 20 mL per litre or 1 part MBL8 to 50 parts engine oil.