While the MECA Gauge determines fluid depth up to 2 metres, the TELEVAR Gauge goes deeper at 5 metres in depth. An entirely pneumatic system, the TELEVAR Gauge is appropriate for all types of congruous fluid.
MECA The 90mm diameter dial can be adjusted for tanks of a lesser depth of 2 metres The gauge is top mounted on the lid of the tank and should ideally be located out of direct sunlight.
TELEVAR The large, readable dial (130mm scale) has a "tell tale" pointer to monitor water usage or rainfall collections, and can be supplied to suit a cylindrical tank either base or side mounted, as is common for gravity fed diesel storage on farms. A sensor is dropped into the tank and a spring loaded plunger displaces fluid, measures levels using the bubbler principle. The TELEVAR Gauge can be mounted up to 50 metres from the tank, above or below it, possibly inside a shed or the house. The indicator can be easily and regularly viewed so that you never run short again.
Both gauges come as a complete kit, ready to install. Installation should take less than 30 minutes. The housing of both gauges is made of hard resin, the float of the MECA gauge is Polypropylene. The TELEVAR kit comes with indicator, sensor, condensation trap and 50 metres of tubing.
MECA and TELEVAR Level Gauges are equally suited to water or diesel applications as well as some pesticides, oils etc. These gauges will measure the contents of a tank or drum as small as 200 litres, and as large as 5 meters in depth irrespective of diameter.
For further information about MECA/TELEVAR Gauges visit Ross Brown Sales at http://www.rossbrownsales.com.au OR Use the IndustrySearch e-mail feature below and one of the Ross Brown Sales team will respond to your enquiry directly.
Ross Brown Sales | Pressure & Temperature, Measurement & Calibration
Ross Brown Sales have specialised in Temperature and Pressure products for nearly fifty years, during which we have become one of Australia’s leading suppliers of pressure and temperature gauges.
We stock a very comprehensive range of gauges from 40mm diameter industrial to 160mm diameter fully stainless steel process gauges. Our stock pressure ranges cover vacuum to pressure from 0-2.5kPa to 160,000kPa.
Specialist gauge services include:
- Calibration of pressure gauges by our NATA accredited pressure laboratory.
- Providing and fitting special gauge dials.
- Fitting, filling and testing isolating diaphragm seals to pressure gauges
Our temperature products include a large range of Bi-metallic thermometers from 80mm to 125mm diameter, digital thermometers and glass thermometers. Data loggers for pressure, temperature and humidity are also available.