Australia's #1 industrial directory for equipment & suppliers

Mixed Signal & Digital Phosphor Oscilloscopes - MSO/DPO4000B Series

Supplier: TekMark Australia

The Tektronix Midrange Scopes Product Line is proud to introduce the MSO/DPO4000B Series Mixed Signal and Digital Phosphor Oscilloscopes.

CONTACT THIS SUPPLIER TO FIND OUT MORE

The MSO/DPO4000B Series, comprehensive tools that speed every stage of design.

Discover events of interest

  • Digital Phosphor Oscilloscope (DPO) Technology with >50,000 maximum waveforms per second acquisition rate
  • DPO intensity graded display
  • Large, bright, color 10.4” XGA (1024 x 768) display

Capture events of interest

  • 4 analog channels
  • 16 digital channels (MSO models)
  • New high-impedance, 3.9 pF input capacitance passive voltage probes with 500 MHz and 1 GHz versions (all models ship with four probes standard)
  • Up to 2.5 GS/s analog sample rate on all channels for 350 MHz and 500 MHz models. Up to 5 GS/s on all channels for 1 GHz models
  • 20 M Sample record length on all channels
  •  Parallel (MSO models) and Serial Bus Triggering and Decode – Create up to 4 parallel (clocked or un-clocked) or serial (I2C, SPI, USB, Ethernet, CAN, LIN, FlexRay, RS-232/422/485/UART, I2S/LJ/RJ/TDM, MIL-STD-1553) buses and decode them
  • Advanced Triggering– Offers a complete set of triggers, including sequence (B Trigger),  runt, logic, pulse width, timeout, video, setup & hold violation, rise/fall time, serial bus, and parallel bus (MSO models)
  • MagniVu High Speed Digital Acquisition– 16.5 GS/s digital sampling in a 10k record centered on the trigger point

Search for events of interest

  • Wave Inspector navigation with Search and Mark
  • Dedicated front panel controls for pan/zoom, play/pause, and navigation of marks
  • Automatically search and mark events of interest in long records in seconds

Analyse events of interest

  • 41 automated measurements standard
  • Advanced waveform math with FFT
  • Specialised Application Support
    • Optional Serial Debug – Serial triggering on packet content, innovative bus display provides higher level, combined view of individual signals, and automatic decode
      • DPO4AERO – Support for MIL-STD-1553 bus
      • DPO4AUDIO – Support for I2S/LJ/RJ/TDM buses
      • DPO4AUTO – Support for CAN and LIN buses
      • DPO4AUTOMAX – Support for FlexRay, CAN, and LIN buses
      • DPO4COMP – Support for RS232/422/485/UART buses
      • DPO4EMBD – Support for I2C and SPI buses
      • DPO4ENET – Support for 10BASE-T and 100BASE-TX buses
      • DPO4USB – Support for Low-speed, Full-speed, and High-speed USB serial buses
    • Optional Power Analysis (DPO4PWR) – Power analysis module. Supports power quality, switching loss, harmonics, ripple, modulation, safe operating area, and slew rate analysis.
    • Optional Limit and Mask Testing (DPO4LMT) – Conduct go/no-go testing using a comparison of a live waveform against a known good or “golden” waveform with tolerances. Or conduct pass/fail analysis on telecommunications and computer standards or on custom signals using flexible test parameters and multiple actions on failure or test completion
    • Optional Extended Video Triggers (DPO4VID)– HDTV and custom video trigger

Fast, Easy Connectivity

  • Connectivity software is included standard
    • Tektronix OpenChoice® Desktop
    • NI LabView SignalExpress™ Tektronix Edition (LE version)
  • LXI Class C Compliance
    • With LXI web interface
  • e*Scope
  • USB host and device ports, LAN port, Video out port

CONTACT THIS SUPPLIER TO FIND OUT MORE

Showcase your business!

Connect with 600,000 industrial buyers annually

Learn more