Australia's #1 industrial directory for equipment & suppliers

Moisture Analysis | MX & ML Series

Supplier: Complete Weighing Solutions

Fast and uniform heating with halogen lamp and innovative SRA technology.


Straight halogen lamp and uniquely designed SRA (Secondary Radiation Assist) filter gives shorter measurement time, thanks to fast and uniform heating

  • High repeatability
    • With SHS (Super Hybrid Sensor) featured as the weight sensor, ultra accurate moisture content determination is possible based on high precision weighing of even a small sample
  • High moisture content measurement
    • MS-70 measures the moisture content at 0.001% resolution suitable for low moisture content samples as well as Karl Fischer method, yet requires no special knowledge or training and produces no harmful waste
  • Standard WinCT-Moisture ( for MS&MX) for real-time graph displaying
    • WinCT-Moisture is an original software application designed to display a graph of moisture content rate change while measuring with a connected PC
  • Sodium Tartrate Dihydrate comes as standard for accuracy checking
    • Sodium Tartrate Dihydrate is a chemical material that has stable moisture content of 15.66% , and thus is best to use for accuracy check to maintain the reference value of the analyzer
  • Calibration of the heater temperature ( for MS&MX)
    • With the temperature calibrator (optional), calibration result can be output in the format that conforms to GLP, GMP, ISO
  • Memory function
    • According to sample up to 20 suitable measurement conditions can be stored and recalled, which saves time and prevents the user from making a mistake when setting (10 for MF and 5 for ML)
    • For measurement result, up to 100 data can be stored and output at once (50 for MF and 30 for ML)
  • Five measurement programs
    • Five choices of measurement programs, Standard, Automatic, Quick, Timer, and Manual Mode are provided
      • Standard Mode : Just measurement accuracy, HI, MID or LO needs to be set
      • Automatic Mode : Ends measurement when moisture content changes at a rate less than the set rate
      • Quick Mode : Begins heating samples at 200°C for 3 minutes, then is the same as Automatic Mode
      • Timer Mode : Continues measurement for a set duration of time (160mins.: by 1min, 60480mins.: by 5mins.)
      • Manual Mode : STOP button should be pressed to end measurement (Max. heating time: 480mins.)
  • Selectable Heating Mode
    • Choose the heating mode from standard, quick, step and ramp heating modes for the most suitable measurement (ML has Standard and Quick heating modes only)
  • Clear and easy-to-see, large VFD display
    • Measurement, setting value, change in moisture content, action status, data number and other important information are clearly displayed
  • Easy handling of the unit
    • Ergonomically designed pan handle eliminates mishaps such as burns when moving a hot sample pan into or out of the unit from either side. Wing handle for easy opening and closing of the heater cover
  • Low maintenance cost assured
    • The halogen lamp is user replaceable without unit downtime with protective chamber for easy cleaning (Lamp life 5000 hours)
  • Progress window for heating check
    • Heating process can be checked through translucent window
  • Self Check function
    • Defect check function is available along with temperature control
  • Quick Reference Card
    • A convenient operating guide is installed at the bottom of the analyzer
  • Standard RS-232C
    • Bi-directional communication with a PC or connects directly to a printer
  • Conformity to GLP, GMP, GCP and ISO with date/time , ID, calibration data and check record outputs
    • Data output for daily record management

Click here to read product brochure


Showcase your business!

Connect with 600,000 industrial buyers annually

Learn more