Australia's #1 industrial directory for equipment & suppliers

MP100A/400A - Relative Humidity & Temperature Probes

Supplier: Pryde Measurement

Features of MP100A/400A - Relative Humidity & Temperature Probes:

CONTACT THIS SUPPLIER TO FIND OUT MORE

  • Precise & stable %rh & Temperature measurement
  • Specially designed for outdoor & meteorological measurements
  • Condensation resistant sensor
  • 0...1 volt output signal(MP100) low power consumption
  • Cable length compensation up to 100m on vlotage output versions
  • 4...20mA output options (MP400)
  • Proven in roadside & airport applications
  • Over 30,000 sold

Technical Data of MP100A/400A - Relative Humidity & Temperature Probes:

  • Humidity sensor: Hygromer C94
  • Temperature Sensor: Pt100/A
  • Range: 0...100%rh, -40...+60deg.C
  • Accuracy @ 23deg.C: +/-1.5%rh, +/-0.3K
  • Long term stability: <1%rh, 0.1K per year typical
  • Response time: <15 seconds
  • Output signal:
  • MP106A:0...1V = 0...100%rh,deg.C 4 wire Pt100 direct
  • MP103A:0...1V + 0...100%rh, -40...+60deg.C
  • MP408A:4...20mA + 0...100%rh, -40...+60deg.C
  • Output load: MP106A/MP103A:min1000Ohm, MP408A: max 500Ohm
  • Power Supply: MP106A/MP103A:4.8...30VDC, 3.5mA(3/4wire), 6mA(5wire), MP408A:4.8...30VDC,50mA
  • Adjustment: Potentiometer,35,80%rh,Hmin
  • Sensor protection: Wire mesh filter
  • Mechanical: White delrin probe with IP65 male connector
  • MP106A/MP103A 250x25mm(diameter)
  • MP408A 260x25mm(diameter)

For More Information on MP100A/400A - Relative Humidity & Temperature Probes >>

CONTACT THIS SUPPLIER TO FIND OUT MORE

Showcase your business!

Connect with 600,000 industrial buyers annually

Learn more